Product Description
60m3/h 5.5KW 300bar Oil Free oxygen booster gas compressor Industrial high pressure gas air compressor
Product Description
Product features
1.Touch display PLC control.
2.Remote control is optional.
3.Inlet and outlet pressure overload,temperature overheating,cooling water failure, circulation rolling alarm and stop.
4.Operation time display, maintenance cycle prompt.
5.With water tank and circulating pump without external pipeline, filling antifreeze at low temperature without obstruction.
| Compressed media | Nitrogen (must be dry and particle free) |
| Model | VWN-60-5-16 |
| Rated flow (standard state) | 60Nm3/h |
| Intake air temperature | ≤40 |
| Intake pressure | 0.5Mpa |
| Exhaust pressure | 1.6Mpa |
| Cylinder diameter * quantity | Φ90+φ65 |
| Engine speed | 470r/min |
| Cooling mode | Air cooling |
| Lubrication method | Fully oil-free lubrication |
| Compression series | 2 |
| Structural type | Angle type, V type |
| Motor power | 5.5kw |
| Transmission mode | Belt drive |
| Installation type | Basic type |
| Dual pressure controller | Intake 4-6 |
| Control mode | Completely oil-free lubrication, air cooling, reciprocating piston type |
| Size of inlet and outlet | RC1″ |
| Dimensions | 1250*500*900mm |
| Weight | 280kg |
Product Parameters
| Compressed media (General for oxygen and nitrogen) |
Model | Capacity (Nm3/h) |
Intake pressure (MPa) |
Exhaust pressure (MPa) |
Power (kW) |
Dimensions (mm) |
| Oxygen/Nitrogen | VW-0.33/5-25 | 20 | 0.5 | 2.5 | 4 | 1220*500*800 |
| Oxygen/Nitrogen | ZWN-3.6/4-8 | 3.6 | 0.4 | 0.8 | 0.75 | 750*500*650 |
| Oxygen/Nitrogen | VWN-10/5-25 | 10 | 0.5 | 2.5 | 4 | 1600*700*1500 |
| Oxygen/Nitrogen | VWN-60/5-16 | 60 | 0.5 | 1.6 | 5.5 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-20/6-20 | 20 | 0.6 | 2.0 | 4 | 1250*600*900 |
| Oxygen/Nitrogen | VWN-20/5-25 | 20 | 0.5 | 2.5 | 4 | 1050*600*1000 |
| Oxygen/Nitrogen | VWN-40/7-25 | 40 | 0.7 | 2.5 | 4 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-60/4-25 | 60 | 0.4 | 2.5 | 11 | 1250*700*900 |
| Oxygen/Nitrogen | WWN-80/4-25 | 80 | 0.4 | 2.5 | 11 | 1350*700*1200 |
| Oxygen/Nitrogen | VWN-80/7-25 | 80 | 0.7 | 2.5 | 7.5 | 1250*700*900 |
| Oxygen/Nitrogen | VWN-60/4-30 | 60 | 0.4 | 3.0 | 3 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-50/4-30 | 50 | 0.4 | 3.0 | 7.5 | 1250*650*1000 |
| Oxygen/Nitrogen | VWN-80/5-30 | 80 | 0.5 | 3.0 | 11 | 1250*700*1000 |
| Oxygen/Nitrogen | VWN-30/5-35 | 30 | 0.5 | 3.5 | 5.5 | 1050*500*1000 |
| Oxygen/Nitrogen | VWN-50/5-35 | 50 | 0.5 | 3.5 | 7.5 | 1050*700*1000 |
| Oxygen/Nitrogen | VWN-40/5-40 | 40 | 0.5 | 4.0 | 7.5 | 1250*600*900 |
| Oxygen/Nitrogen | VWY-80/0.5-50 | 80 | 0.05 | 5.0 | 18.5 | 1250*700*900 |
| Oxygen/Nitrogen | VWND-55/5-8 | 55 | 0.5 | 0.8 | 4 | 1400*810*1300 |
| Oxygen/Nitrogen | VWN-60/5-10 | 60 | 0.5 | 1.0 | 4 | 1250*500*900 |
| Oxygen/Nitrogen | VWY-75/4-16 | 75 | 0.4 | 1.6 | 7.5 | 1050*500*1000 |
| Oxygen/Nitrogen | VWND-100/5-10 | 100 | 0.5 | 1.0 | 5.5 | 1400*930*1350 |
| Oxygen/Nitrogen | VWN-120/6-16 | 120 | 0.6 | 1.6 | 11 | 1250*700*1000 |
| Oxygen/Nitrogen | VWN-140/5-8 | 140 | 0.5 | 0.8 | 5.5 | 1250*600*900 |
| Oxygen/Nitrogen | WWND-150/4-10 | 150 | 0.4 | 1.0 | 11 | 1430*1030*1350 |
| Oxygen/Nitrogen | SWND-240/4-10 | 240 | 0.4 | 1.0 | 15 | 1500×1100×1620 |
| Oxygen/Nitrogen | VWY-120/5-10 | 120 | 0.5 | 1.0 | 7.5 | 1250*600*1000 |
| Oxygen/Nitrogen | SWY-150/4-16 | 150 | 0.4 | 1.6 | 15 | 1250*900*1480 |
| Oxygen/Nitrogen | WWN-100/4-25 | 100 | 0.4 | 2.5 | 15 | 1350*700*1200 |
| Oxygen/Nitrogen | WWN-120/6-30 | 120 | 0.6 | 3.0 | 15 | 1250*800*1200 |
| Oxygen/Nitrogen | WWN-120/6-45 | 120 | 0.6 | 4.5 | 18.5 | 1350*1100*1100 |
| Oxygen/Nitrogen | WWN-80/5-45 | 80 | 0.5 | 4.5 | 15 | 1350*700*1200 |
| Oxygen/Nitrogen | WWN-240/5-10 | 240 | 0.5 | 1.0 | 15 | 1350*800*1200 |
| Oxygen/Nitrogen | WWN-300/0.5-8-II | 300 | 0.05 | 0.8 | 22*2 | 2500*1200*800 |
| Oxygen/Nitrogen | WWNFB-900/4-8-II | 900 | 0.4 | 0.8 | 22*2 | 2600*1000*900 |
| Oxygen/Nitrogen | VWN-180/5-25-II | 180 | 0.5 | 2.5 | 11*2 | 1500*1350*1100 |
| Oxygen/Nitrogen | WWN-200/3-18-II | 200 | 0.3 | 1.8 | 11*2 | 1450*1350*1100 |
| Oxygen/Nitrogen | WWN-200/6-30-II | 200 | 0.6 | 3.0 | 11*2 | 1600*1600*1200 |
| Oxygen/Nitrogen | WWFB-430/4-9 | 430 | 0.4 | 0.9 | 22 | 1500*1000*800 |
Successful cases
FAQ
FAQ:
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 24 Months |
| Lubrication Style: | Oil-free |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
.webp)
What Is the Noise Level of Gas Air Compressors?
The noise level of gas air compressors can vary depending on several factors, including the compressor’s design, engine type, operating conditions, and the presence of noise-reducing features. Here’s a detailed explanation:
1. Compressor Design:
The design of the gas air compressor can influence its noise level. Some compressors are engineered with noise reduction in mind, utilizing features such as sound insulation, vibration dampening materials, and mufflers to minimize noise generation. Compressors with enclosed cabinets or acoustic enclosures tend to have lower noise levels compared to open-frame compressors.
2. Engine Type:
The type of engine used in the gas air compressor can impact the noise level. Gas air compressors typically use internal combustion engines powered by gasoline or propane. Gasoline engines tend to produce higher noise levels compared to diesel engines or electric motors. However, advancements in engine technology have led to quieter gasoline engines with improved noise control.
3. Operating Conditions:
The operating conditions of the gas air compressor can affect the noise level. Factors such as the load capacity, speed of operation, and ambient temperature can influence the amount of noise generated. Compressors operating at higher loads or speeds may produce more noise compared to those running at lower levels.
4. Noise-Reducing Features:
Some gas air compressors are equipped with noise-reducing features to minimize sound emissions. These may include built-in silencers, acoustic enclosures, or noise-absorbing materials. Such features help dampen the noise produced by the compressor and reduce its overall noise level.
5. Manufacturer Specifications:
Manufacturers often provide noise level specifications for their gas air compressors. These specifications typically indicate the sound pressure level (SPL) in decibels (dB) at a specific distance from the compressor. It is important to refer to these specifications to get an idea of the expected noise level of a particular compressor model.
6. Distance and Location:
The distance between the gas air compressor and the listener can impact the perceived noise level. As sound waves disperse, the noise level decreases with distance. Locating the compressor in an area that is isolated or distant from occupied spaces can help minimize the impact of noise on the surrounding environment.
It is important to note that gas air compressors, especially those used in industrial or heavy-duty applications, can generate substantial noise levels. Occupational health and safety regulations may require the use of hearing protection for individuals working in close proximity to loud compressors.
Overall, the noise level of gas air compressors can vary, and it is advisable to consult the manufacturer’s specifications and consider noise-reducing features when selecting a compressor. Proper maintenance, such as regular lubrication and inspection of components, can also help minimize noise levels and ensure optimal performance.
.webp)
Can Gas Air Compressors Be Used in Agriculture?
Yes, gas air compressors can be used in various agricultural applications. Here’s a detailed explanation:
1. Pneumatic Tools and Equipment:
Gas air compressors can power a wide range of pneumatic tools and equipment used in agriculture. These tools include pneumatic drills, impact wrenches, nail guns, staplers, and pneumatic pumps. Gas air compressors provide the necessary compressed air to operate these tools, making various tasks more efficient and convenient on the farm.
2. Irrigation Systems:
Gas air compressors can be used to power irrigation systems in agriculture. They can supply compressed air to operate pneumatic valves, which control the flow of water in irrigation networks. Gas air compressors ensure reliable and efficient operation of irrigation systems, facilitating the distribution of water to crops in a controlled manner.
3. Grain Handling and Storage:
Air compressors play a vital role in grain handling and storage facilities. They are used to power aeration systems that provide airflow to grains stored in silos or bins. Aeration helps control the temperature and moisture levels, preventing spoilage and maintaining grain quality. Gas air compressors provide the airflow necessary for effective aeration in grain storage operations.
4. Cleaning and Maintenance:
In agriculture, gas air compressors are commonly used for cleaning and maintenance tasks. They can power air blowers or air guns to remove dust, debris, or chaff from machinery, equipment, or storage areas. Gas air compressors provide a high-pressure stream of compressed air, facilitating efficient cleaning and maintenance operations.
5. Livestock Operations:
Gas air compressors find applications in livestock operations as well. They can power pneumatic equipment used for animal care, such as pneumatic nail guns for building or repairing livestock enclosures, pneumatic pumps for water distribution, or pneumatic tools for general maintenance tasks.
6. Portable and Versatile:
Gas air compressors are often portable and can be easily transported around the farm, allowing flexibility in agricultural operations. Their versatility makes them suitable for various tasks, from powering tools and equipment in the field to providing compressed air for maintenance or cleaning in different farm locations.
7. Remote Locations:
In agricultural settings where access to electricity may be limited, gas air compressors offer a reliable alternative. They can be powered by gasoline or diesel engines, providing compressed air even in remote areas without electrical infrastructure.
8. Considerations:
When using gas air compressors in agriculture, it is essential to consider factors such as compressor size, capacity, and maintenance requirements. Selecting the right compressor based on the specific needs of the agricultural applications ensures optimal performance and efficiency.
In summary, gas air compressors have various applications in agriculture. They can power pneumatic tools and equipment, operate irrigation systems, facilitate grain handling and storage, assist in cleaning and maintenance tasks, support livestock operations, and offer portability and versatility. Gas air compressors contribute to increased efficiency, convenience, and productivity in agricultural operations.
.webp)
What Industries Commonly Use Gas Air Compressors?
Gas air compressors find applications in various industries where compressed air is required for powering tools, equipment, and systems. These compressors are valued for their portability, versatility, and ability to provide high-pressure air. Here’s a detailed explanation of the industries that commonly use gas air compressors:
1. Construction Industry:
The construction industry extensively utilizes gas air compressors for a wide range of tasks. Compressed air is used to power pneumatic tools such as jackhammers, nail guns, impact wrenches, and concrete breakers. Gas air compressors provide the necessary airflow and pressure to operate these tools efficiently, making them ideal for construction sites.
2. Mining Industry:
In the mining industry, gas air compressors play a vital role in various operations. Compressed air is used to power pneumatic tools for drilling, rock blasting, and excavation. It is also employed in ventilation systems, conveying systems, and pneumatic control devices in mines. Gas air compressors are valued for their durability and ability to operate in rugged and remote mining environments.
3. Oil and Gas Industry:
The oil and gas industry relies on gas air compressors for numerous applications. They are used for well drilling operations, powering pneumatic tools, and maintaining pressure in oil and gas pipelines. Gas air compressors are also utilized in natural gas processing plants, refineries, and petrochemical facilities for various pneumatic processes and equipment.
4. Manufacturing and Industrial Sector:
In the manufacturing and industrial sector, gas air compressors are extensively used in different applications. They provide compressed air for pneumatic tools, such as air-powered drills, sanders, grinders, and spray guns. Compressed air is also used in manufacturing processes such as material handling, assembly line operations, and pneumatic control systems.
5. Automotive Industry:
The automotive industry utilizes gas air compressors for a variety of tasks. Compressed air is employed in automotive assembly plants for pneumatic tools, paint spraying booths, and pneumatic control systems. Gas air compressors are also used in auto repair shops for powering air tools, tire inflation, and operating pneumatic lifts.
6. Agriculture and Farming:
Gas air compressors have applications in the agriculture and farming sector. They are used for tasks such as powering pneumatic tools for crop irrigation, operating pneumatic seeders or planters, and providing compressed air for farm maintenance and repair work. Portable gas air compressors are particularly useful in agricultural settings where electricity may not be readily available.
7. Food and Beverage Industry:
In the food and beverage industry, gas air compressors are employed for various pneumatic processes and equipment. They are used in food packaging operations, pneumatic conveying systems for ingredients and finished products, and air-powered mixing and blending processes. Gas air compressors in this industry are designed to meet strict hygiene and safety standards.
8. Pharmaceutical and Healthcare Sector:
The pharmaceutical and healthcare sector utilizes gas air compressors for critical applications. Compressed air is used in medical devices, dental equipment, laboratory instruments, and pharmaceutical manufacturing processes. Gas air compressors in this industry must adhere to stringent quality standards and maintain air purity.
These are just a few examples of the industries that commonly use gas air compressors. Other sectors, such as power generation, aerospace, marine, and chemical industries, also rely on gas air compressors for specific applications. The versatility and reliability of gas air compressors make them indispensable in numerous industries where compressed air is a vital resource.
editor by CX 2024-01-08
China Custom Low Noise Water-Cooling Gas Booster Compressor for Laser air compressor CHINAMFG freight
Product Description
Oil-free Gas Compressor Booster
Product Description
Completely oil-free reciprocating piston compressor series: flow rate from 0.01m ³/ Min, pressure ranging from 0.1MPa to 15Mpa, motor power ranging from 0.1KW to 132KW, compressed medium including air, oxygen, nitrogen, sulfur hexafluoride, oil gas, hydrogen, helium, argon, carbon dioxide, biogas, natural gas, etc. According to user requirements, there are regular, silent, explosion-proof, anti-corrosion, etc.
Simultaneously equipped with post-processing equipment including coolers, high-efficiency oil removers, refrigerated dryers, adsorption dryers, filters, etc., we provide economical and reasonable configurations according to your different requirements for compressed gas quality. Oil content<0.01PPM, dust particles<0.01HM, CHINAMFG a low pressure dew point of -40 ºC. The gas storage tank series includes air storage tanks, oxygen storage tanks, steam storage tanks, chemical storage tanks, sandblasting tanks, sub cylinders, etc., with a volume of 0.05m ³ To 1000m ³, The pressure ranges from 0.1Mpa to 10.0Mpa. The above products are widely used in industries such as food, beverage, grain machinery, water treatment, medical, pharmaceutical, petroleum, chemical, laser, communication, national defense, scientific research, metallurgy, mining, electronics, power, instruments, automotive protection, advanced spraying, etc.
Product Type
| Oxygen compressor | Nitrogen compressor |
| Used in hospital oxygen supply centers to increase the pressure of the room’s oxygen supply pipeline, boost oxygen, and fill it into steel cylinders. It can also be used for industrial acetylene combustion cutting, cutting scrap steel in steel plants, supporting boiler oxygen combustion, and recirculating the vapor oxygen from low-temperature liquid oxygen tanks into the tanks for various working conditions | Mainly used for pressurization and filling of nitrogen gas cylinders, as well as nitrogen pressure testing and leakage testing of pipelines. The maximum filling pressure can reach 40MPA, which can be divided into air-cooled and water-cooled cooling according to the cooling method, and 3 and 4 stages of compression according to the compression stage. |
| Hydrogen compressor | Carbon dioxide compressor |
| Used for pressurizing hydrogen in steel plant heat treatment, in the polycrystalline silicon industry, to provide continuous pressure raw material hydrogen for reactors. In the future, with the widespread construction of hydrogen refueling stations, hydrogen compressors will be more used in hydrogen fuel cells, filling hydrogen vehicles with very high pressure to obtain clean, green, and pollution-free energy. |
Used for the recovery of carbon dioxide gas in dry ice plants, and for the recovery, storage, and reuse of CO2 in the supercritical extraction process of carbon dioxide; In the dry ice factory and carbon dioxide extraction process, the suction pressure of the compressor is 0-1BARG, the discharge pressure can reach 80BAR, and the flow rate is 5NM3-600NM3/hour |
Product Parameters
Detailed Photos
1.The friction components are made using special self-lubricating materials, allowing them to operate without the need for any additional lubricating oil.
2.The expelled air is oil-free, eliminating concerns about secondary pollution of gas facilities and products by oil.
3.It provides both environmental and societal benefits.
4.Only 2 daily inspections are required, making usage and maintenance more convenient.
5.The oil-free design is employed, with no oil present in the crankcase and compression cylinder.
6.These components boast a long lifespan. All models utilize a 4-level motor drive, ensuring low-speed, smooth operation. The mid-cooler is divided for better temperature control, resulting in lower exhaust temperatures and reduced resistance losses in the valve group design.
Project Case
Product Applications
Application:
The above products are widely used in industries such as food, beverage, grain machinery, water treatment, medical, pharmaceutical, petroleum, chemical, laser, communication, national defense, scientific research, metallurgy, mining, electronics, power, instruments, automotive protection, advanced spraying, etc.
Company Profile
WOBO has a comprehensive marketing service system and strong continuous research and development capabilities. Its products cover more than 30 types of gas chemical compressors, including oil free lubrication air compressors, oxygen compressors, nitrogen compressors, hydrogen compressors, carbon dioxide compressors, helium compressors, argon compressors, sulfur hexafluoride compressors, etc. The maximum pressure can reach 35Mpa. The products are widely used in petrochemical, textile, food, medicine, electricity, machinery, metallurgy, etc, In various fields such as home appliances and environmental protection, our company’s multiple wind brand oil-free compressors have been exported to more than 40 countries and regions in Europe, America, Japan, South Korea, Southeast Asia, the Middle East, and Africa, winning widespread praise from many customers. The WOBO brand has established a good quality reputation in the hearts of users.
| After-sales Service: | Online Support, Video Technical Support |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Oil-free |
| Samples: |
US$ 5700/Unit
1 Unit(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What Is the Noise Level of Gas Air Compressors?
The noise level of gas air compressors can vary depending on several factors, including the compressor’s design, engine type, operating conditions, and the presence of noise-reducing features. Here’s a detailed explanation:
1. Compressor Design:
The design of the gas air compressor can influence its noise level. Some compressors are engineered with noise reduction in mind, utilizing features such as sound insulation, vibration dampening materials, and mufflers to minimize noise generation. Compressors with enclosed cabinets or acoustic enclosures tend to have lower noise levels compared to open-frame compressors.
2. Engine Type:
The type of engine used in the gas air compressor can impact the noise level. Gas air compressors typically use internal combustion engines powered by gasoline or propane. Gasoline engines tend to produce higher noise levels compared to diesel engines or electric motors. However, advancements in engine technology have led to quieter gasoline engines with improved noise control.
3. Operating Conditions:
The operating conditions of the gas air compressor can affect the noise level. Factors such as the load capacity, speed of operation, and ambient temperature can influence the amount of noise generated. Compressors operating at higher loads or speeds may produce more noise compared to those running at lower levels.
4. Noise-Reducing Features:
Some gas air compressors are equipped with noise-reducing features to minimize sound emissions. These may include built-in silencers, acoustic enclosures, or noise-absorbing materials. Such features help dampen the noise produced by the compressor and reduce its overall noise level.
5. Manufacturer Specifications:
Manufacturers often provide noise level specifications for their gas air compressors. These specifications typically indicate the sound pressure level (SPL) in decibels (dB) at a specific distance from the compressor. It is important to refer to these specifications to get an idea of the expected noise level of a particular compressor model.
6. Distance and Location:
The distance between the gas air compressor and the listener can impact the perceived noise level. As sound waves disperse, the noise level decreases with distance. Locating the compressor in an area that is isolated or distant from occupied spaces can help minimize the impact of noise on the surrounding environment.
It is important to note that gas air compressors, especially those used in industrial or heavy-duty applications, can generate substantial noise levels. Occupational health and safety regulations may require the use of hearing protection for individuals working in close proximity to loud compressors.
Overall, the noise level of gas air compressors can vary, and it is advisable to consult the manufacturer’s specifications and consider noise-reducing features when selecting a compressor. Proper maintenance, such as regular lubrication and inspection of components, can also help minimize noise levels and ensure optimal performance.
.webp)
How Do You Transport Gas Air Compressors to Different Job Sites?
Transporting gas air compressors to different job sites requires careful planning and consideration of various factors. Here’s a detailed explanation:
1. Equipment Size and Weight:
The size and weight of the gas air compressor are crucial factors to consider when planning transportation. Gas air compressors come in different sizes and configurations, ranging from portable units to larger, skid-mounted or trailer-mounted compressors. Assess the dimensions and weight of the compressor to determine the appropriate transportation method.
2. Transportation Modes:
Gas air compressors can be transported using different modes of transportation, depending on their size, weight, and distance to the job site:
- Truck or Trailer: Smaller gas air compressors can be loaded onto a truck bed or trailer for transportation. Ensure that the vehicle or trailer has the necessary capacity to accommodate the weight and dimensions of the compressor.
- Flatbed or Lowboy Trailer: Larger gas compressors or skid-mounted units may require transportation on a flatbed or lowboy trailer. These trailers are designed to carry heavy equipment and provide stability during transportation.
- Shipping Container: For long-distance transportation or international shipments, gas air compressors can be transported in shipping containers. The compressor must be properly secured and protected within the container to prevent any damage during transit.
3. Securing and Protection:
It is essential to secure the gas air compressor properly during transportation to prevent shifting or damage. Use appropriate tie-down straps, chains, or fasteners to secure the compressor to the transport vehicle or trailer. Protect the compressor from potential impacts, vibrations, and weather conditions by using suitable covers, padding, or weatherproof enclosures.
4. Permits and Regulations:
Depending on the size and weight of the gas air compressor, special permits or escorts may be required for transportation. Familiarize yourself with local, state, and federal regulations regarding oversize or overweight loads, and obtain the necessary permits to ensure compliance with transportation laws.
5. Route Planning:
Plan the transportation route carefully, considering factors such as road conditions, height and weight restrictions, bridges, tunnels, and any other potential obstacles. Identify alternative routes if needed, and communicate with transportation authorities or agencies to ensure a smooth and safe journey.
6. Equipment Inspection and Maintenance:
Prior to transportation, conduct a thorough inspection of the gas air compressor to ensure it is in proper working condition. Check for any leaks, damage, or loose components. Perform routine maintenance tasks, such as oil changes, filter replacements, and belt inspections, to minimize the risk of equipment failure during transportation.
In summary, transporting gas air compressors to different job sites requires considering factors such as equipment size and weight, choosing appropriate transportation modes, securing and protecting the compressor, obtaining necessary permits, planning the route, and conducting equipment inspection and maintenance. Careful planning and adherence to transportation regulations contribute to the safe and efficient transportation of gas air compressors.
.webp)
What Fuels Are Commonly Used in Gas Air Compressors?
Gas air compressors can be powered by various fuels depending on the specific model and design. The choice of fuel depends on factors such as availability, cost, convenience, and environmental considerations. Here’s a detailed explanation of the fuels commonly used in gas air compressors:
1. Gasoline:
Gasoline is a widely used fuel in gas air compressors, particularly in portable models. Gasoline-powered compressors are popular due to the widespread availability of gasoline and the convenience of refueling. Gasoline engines are generally easy to start, and gasoline is relatively affordable in many regions. However, gasoline-powered compressors may emit more exhaust emissions compared to some other fuel options.
2. Diesel:
Diesel fuel is another common choice for gas air compressors, especially in larger industrial models. Diesel engines are known for their efficiency and durability, making them suitable for heavy-duty applications. Diesel fuel is often more cost-effective than gasoline, and diesel-powered compressors typically offer better fuel efficiency and longer runtime. Diesel compressors are commonly used in construction sites, mining operations, and other industrial settings.
3. Natural Gas:
Natural gas is a clean-burning fuel option for gas air compressors. It is a popular choice in areas where natural gas infrastructure is readily available. Natural gas compressors are often used in natural gas processing plants, pipeline operations, and other applications where natural gas is abundant. Natural gas-powered compressors offer lower emissions compared to gasoline or diesel, making them environmentally friendly.
4. Propane:
Propane, also known as liquefied petroleum gas (LPG), is commonly used as a fuel in gas air compressors. Propane-powered compressors are popular in construction, agriculture, and other industries where propane is used for various applications. Propane is stored in portable tanks, making it convenient for use in portable compressors. Propane-powered compressors are known for their clean combustion, low emissions, and easy availability.
5. Biogas:
In specific applications, gas air compressors can be fueled by biogas, which is produced from the decomposition of organic matter such as agricultural waste, food waste, or wastewater. Biogas compressors are used in biogas production facilities, landfills, and other settings where biogas is generated and utilized as a renewable energy source. The use of biogas as a fuel in compressors contributes to sustainability and reduces dependence on fossil fuels.
It’s important to note that the availability and suitability of these fuel options may vary depending on the region, infrastructure, and specific application requirements. When selecting a gas air compressor, it’s crucial to consider the compatibility of the compressor with the available fuel sources and to follow the manufacturer’s guidelines regarding fuel selection, storage, and safety precautions.
editor by CX 2023-11-06
China factory CHINAMFG Oil Free Piston High Pressure Medical Oxygen Booster Compressor 200bar air compressor oil
Product Description
NUZHUO Oil Free Piston High Pressure Medical Oxygen Booster Compressor 200bar
|
Product Name |
Oil Free Gas Compressor |
|||
|
Power Range |
<55KW |
|||
|
Model No. |
GWX- 5/10/20/40/60/80/CUSTOMIZED |
|||
|
Cooling Method |
Air-cooled or Water-cooled |
|||
|
Speed Range |
300-600r/min |
|||
|
Compression Stages |
Level 3-4 |
|||
|
Exhaust Pressure Range |
≤25.0Mpa |
|||
|
Inspiratory Pressure Range |
0-0.6Mpa |
|||
Technical features
The equipment does not need to add lubricating oil, and the exhaust gas does not contain oil and oil vapor, so it can
be protected from pollution, eliminating the need for complex filtration and purification systems, saving equipment
costs and maintenance costs, and has significant features such as safety, reliability, and easy operation.
Technical features
Details Images
FAQ
Q1: Are you a trading company or manufacturer?
A:We are a manufacturer.
Q2: What is your term of payment?
A: 30%T/T in advance and balance before shipment.
Q3: How long is your delivery time?
A: Depending on what type of machine you are purchased, normally 5 to 10 working days.
Q4: What is your product quality assurance policy? A:We offer a warranty period of 1 year, free lifetime technology support.
Q5: Do you offer OEM/ODM service?
A: Yes.
Q6: Does your product used or new? RTS product or customized product?
A:Our machine is new unit, and following your specific require to design and make it.
| After-sales Service: | Support |
|---|---|
| Warranty: | 1year |
| Lubrication Style: | Oil-less |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What Is the Typical Lifespan of a Gas Air Compressor?
The typical lifespan of a gas air compressor can vary depending on several factors, including the quality of the compressor, its usage patterns, maintenance practices, and environmental conditions. However, with proper care and maintenance, a gas air compressor can last for many years. Here’s a detailed explanation of the factors that can affect the lifespan of a gas air compressor:
1. Quality of the Compressor:
The quality and construction of the gas air compressor play a significant role in determining its lifespan. Compressors made with high-quality materials, precision engineering, and robust components are generally more durable and can withstand heavy usage over an extended period.
2. Usage Patterns:
The usage patterns of the gas air compressor can impact its lifespan. If the compressor is used consistently and for extended periods, it may experience more wear and tear compared to compressors used intermittently or for lighter tasks. Heavy-duty applications, such as continuous operation with high-demand tools, can put more strain on the compressor and potentially reduce its lifespan.
3. Maintenance Practices:
Regular maintenance is crucial for extending the lifespan of a gas air compressor. Following the manufacturer’s recommended maintenance schedule, performing routine tasks like oil changes, filter cleaning/replacement, and inspection of components can help prevent issues and ensure optimal performance. Neglecting maintenance can lead to accelerated wear and potential breakdowns.
4. Environmental Conditions:
The operating environment can significantly impact the lifespan of a gas air compressor. Factors such as temperature extremes, humidity levels, presence of dust or debris, and exposure to corrosive substances can affect the compressor’s components and overall performance. Compressors used in harsh environments may require additional protection or specialized maintenance to mitigate these adverse conditions.
5. Proper Installation and Operation:
Proper installation and correct operation of the gas air compressor are essential for its longevity. Following the manufacturer’s guidelines for installation, ensuring proper ventilation, maintaining correct oil levels, and operating within the compressor’s specified capacity and pressure limits can help prevent excessive strain and premature wear.
Considering these factors, a well-maintained gas air compressor can typically last anywhere from 10 to 15 years or even longer. However, it’s important to note that this is a general estimate, and individual results may vary. Some compressors may experience shorter lifespans due to heavy usage, inadequate maintenance, or other factors, while others may last well beyond the expected lifespan with proper care and favorable conditions.
Ultimately, investing in a high-quality gas air compressor, adhering to recommended maintenance practices, and using it within its intended capabilities can help maximize its lifespan and ensure reliable performance for an extended period.
How Do You Transport Gas Air Compressors to Different Job Sites?
Transporting gas air compressors to different job sites requires careful planning and consideration of various factors. Here’s a detailed explanation:
1. Equipment Size and Weight:
The size and weight of the gas air compressor are crucial factors to consider when planning transportation. Gas air compressors come in different sizes and configurations, ranging from portable units to larger, skid-mounted or trailer-mounted compressors. Assess the dimensions and weight of the compressor to determine the appropriate transportation method.
2. Transportation Modes:
Gas air compressors can be transported using different modes of transportation, depending on their size, weight, and distance to the job site:
- Truck or Trailer: Smaller gas air compressors can be loaded onto a truck bed or trailer for transportation. Ensure that the vehicle or trailer has the necessary capacity to accommodate the weight and dimensions of the compressor.
- Flatbed or Lowboy Trailer: Larger gas compressors or skid-mounted units may require transportation on a flatbed or lowboy trailer. These trailers are designed to carry heavy equipment and provide stability during transportation.
- Shipping Container: For long-distance transportation or international shipments, gas air compressors can be transported in shipping containers. The compressor must be properly secured and protected within the container to prevent any damage during transit.
3. Securing and Protection:
It is essential to secure the gas air compressor properly during transportation to prevent shifting or damage. Use appropriate tie-down straps, chains, or fasteners to secure the compressor to the transport vehicle or trailer. Protect the compressor from potential impacts, vibrations, and weather conditions by using suitable covers, padding, or weatherproof enclosures.
4. Permits and Regulations:
Depending on the size and weight of the gas air compressor, special permits or escorts may be required for transportation. Familiarize yourself with local, state, and federal regulations regarding oversize or overweight loads, and obtain the necessary permits to ensure compliance with transportation laws.
5. Route Planning:
Plan the transportation route carefully, considering factors such as road conditions, height and weight restrictions, bridges, tunnels, and any other potential obstacles. Identify alternative routes if needed, and communicate with transportation authorities or agencies to ensure a smooth and safe journey.
6. Equipment Inspection and Maintenance:
Prior to transportation, conduct a thorough inspection of the gas air compressor to ensure it is in proper working condition. Check for any leaks, damage, or loose components. Perform routine maintenance tasks, such as oil changes, filter replacements, and belt inspections, to minimize the risk of equipment failure during transportation.
In summary, transporting gas air compressors to different job sites requires considering factors such as equipment size and weight, choosing appropriate transportation modes, securing and protecting the compressor, obtaining necessary permits, planning the route, and conducting equipment inspection and maintenance. Careful planning and adherence to transportation regulations contribute to the safe and efficient transportation of gas air compressors.
What Are the Primary Applications of Gas Air Compressors?
Gas air compressors have a wide range of applications across various industries and activities. These compressors, powered by gas engines, provide a portable and versatile source of compressed air. Here’s a detailed explanation of the primary applications of gas air compressors:
1. Construction Industry:
Gas air compressors are extensively used in the construction industry. They power a variety of pneumatic tools and equipment, such as jackhammers, nail guns, impact wrenches, and concrete breakers. The portable nature of gas air compressors makes them ideal for construction sites where electricity may not be readily available or practical to use.
2. Agriculture and Farming:
Gas air compressors find applications in the agricultural sector. They are used to operate air-powered machinery and tools, including pneumatic seeders, sprayers, and agricultural pumps. Gas air compressors provide the necessary power to carry out tasks such as crop seeding, irrigation, and pest control in agricultural settings.
3. Recreational Activities:
Gas air compressors are commonly utilized in recreational activities. They are used to inflate tires, sports balls, inflatable structures, and recreational equipment such as air mattresses, rafts, and inflatable toys. Gas air compressors provide a convenient and portable solution for inflating various recreational items in outdoor settings.
4. Mobile Service Operations:
Gas air compressors are employed in mobile service operations, such as mobile mechanics, tire service providers, and mobile equipment repair services. These compressors power air tools and equipment required for on-site repairs, maintenance, and servicing of vehicles, machinery, and equipment. The mobility of gas air compressors allows service providers to bring their tools and compressed air source directly to the location of the service requirement.
5. Remote Job Sites:
Gas air compressors are well-suited for remote job sites or locations without access to electricity. They are commonly used in industries such as mining, oil and gas exploration, and remote construction projects. Gas air compressors power pneumatic tools, machinery, and drilling equipment in these environments, providing a reliable source of compressed air for operational needs.
6. Emergency and Backup Power:
In emergency situations or during power outages, gas air compressors can serve as a backup power source. They can power essential equipment and systems that rely on compressed air, such as emergency lighting, communication devices, medical equipment, and backup generators. Gas air compressors provide a reliable alternative power solution when electrical power is unavailable or unreliable.
7. Sandblasting and Surface Preparation:
Gas air compressors are used in sandblasting and surface preparation applications. They provide the high-pressure air necessary for propelling abrasive media, such as sand or grit, to remove paint, rust, or other coatings from surfaces. Gas air compressors offer the power and portability required for sandblasting operations in various industries, including automotive, metal fabrication, and industrial maintenance.
8. Off-Road and Outdoor Equipment:
Gas air compressors are commonly integrated into off-road and outdoor equipment, such as off-road vehicles, utility trucks, and recreational vehicles. They power air-operated systems, including air suspension systems, air brakes, air lockers, and air horns. Gas air compressors provide the necessary compressed air for reliable and efficient operation of these systems in rugged and outdoor environments.
Overall, gas air compressors have diverse applications in construction, agriculture, recreational activities, mobile service operations, remote job sites, emergency power backup, sandblasting, and various off-road and outdoor equipment. Their portability, versatility, and reliable power supply make them indispensable tools in numerous industries and activities.
editor by CX 2023-10-26
China supplier O2 Air Compressor Oxygen Argon Gas Cylinder Filling Station Nitrogen Booster Air Compressor air compressor parts
Product Description
O2 Air Compressor Oxygen Argon Gas Cylinder Filling Station Nitrogen Booster Air Compressor
Product Description
Product features
1.Touch display PLC control.
2.Remote control is optional.
3.Inlet and outlet pressure overload,temperature overheating,cooling water failure, circulation rolling alarm and stop.
4.Operation time display, maintenance cycle prompt.
5.With water tank and circulating pump without external pipeline, filling antifreeze at low temperature without obstruction.
| Compressed media | Nitrogen (must be dry and particle free) |
| Model | VWN-180/5-25-II |
| Rated flow (standard state) | 180Nm3/h |
| Intake air temperature | ≤40 |
| Intake pressure | 0.5Mpa |
| Exhaust pressure | 2.5Mpa |
| Cylinder diameter * quantity | (Φ90+φ65)*2 |
| Engine speed | 720r/min |
| Cooling mode | Air cooling |
| Lubrication method | Fully oil-free lubrication |
| Compression series | 2 |
| Structural type | Angle type, V type |
| Motor power | 11kw*2 |
| Transmission mode | Belt drive |
| Installation type | Basic type |
| Dual pressure controller | Intake 4-6 |
| Control mode | Completely oil-free lubrication, air cooling, reciprocating piston type |
| Size of inlet and outlet | RC1″ |
| Dimensions | 1500*1350*1100mm |
| Weight | 280kg |
Product Parameters
| Compressed media (General for oxygen and nitrogen) |
Model | Capacity (Nm3/h) |
Intake pressure (MPa) |
Exhaust pressure (MPa) |
Power (kW) |
Dimensions (mm) |
| Oxygen/Nitrogen | VW-0.33/5-25 | 20 | 0.5 | 2.5 | 4 | 1220*500*800 |
| Oxygen/Nitrogen | ZWN-3.6/4-8 | 3.6 | 0.4 | 0.8 | 0.75 | 750*500*650 |
| Oxygen/Nitrogen | VWN-10/5-25 | 10 | 0.5 | 2.5 | 4 | 1600*700*1500 |
| Oxygen/Nitrogen | VWN-60/5-16 | 60 | 0.5 | 1.6 | 5.5 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-20/6-20 | 20 | 0.6 | 2.0 | 4 | 1250*600*900 |
| Oxygen/Nitrogen | VWN-20/5-25 | 20 | 0.5 | 2.5 | 4 | 1050*600*1000 |
| Oxygen/Nitrogen | VWN-40/7-25 | 40 | 0.7 | 2.5 | 4 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-60/4-25 | 60 | 0.4 | 2.5 | 11 | 1250*700*900 |
| Oxygen/Nitrogen | WWN-80/4-25 | 80 | 0.4 | 2.5 | 11 | 1350*700*1200 |
| Oxygen/Nitrogen | VWN-80/7-25 | 80 | 0.7 | 2.5 | 7.5 | 1250*700*900 |
| Oxygen/Nitrogen | VWN-60/4-30 | 60 | 0.4 | 3.0 | 3 | 1250*500*900 |
| Oxygen/Nitrogen | VWN-50/4-30 | 50 | 0.4 | 3.0 | 7.5 | 1250*650*1000 |
| Oxygen/Nitrogen | VWN-80/5-30 | 80 | 0.5 | 3.0 | 11 | 1250*700*1000 |
| Oxygen/Nitrogen | VWN-30/5-35 | 30 | 0.5 | 3.5 | 5.5 | 1050*500*1000 |
| Oxygen/Nitrogen | VWN-50/5-35 | 50 | 0.5 | 3.5 | 7.5 | 1050*700*1000 |
| Oxygen/Nitrogen | VWN-40/5-40 | 40 | 0.5 | 4.0 | 7.5 | 1250*600*900 |
| Oxygen/Nitrogen | VWY-80/0.5-50 | 80 | 0.05 | 5.0 | 18.5 | 1250*700*900 |
| Oxygen/Nitrogen | VWND-55/5-8 | 55 | 0.5 | 0.8 | 4 | 1400*810*1300 |
| Oxygen/Nitrogen | VWN-60/5-10 | 60 | 0.5 | 1.0 | 4 | 1250*500*900 |
| Oxygen/Nitrogen | VWY-75/4-16 | 75 | 0.4 | 1.6 | 7.5 | 1050*500*1000 |
| Oxygen/Nitrogen | VWND-100/5-10 | 100 | 0.5 | 1.0 | 5.5 | 1400*930*1350 |
| Oxygen/Nitrogen | VWN-120/6-16 | 120 | 0.6 | 1.6 | 11 | 1250*700*1000 |
| Oxygen/Nitrogen | VWN-140/5-8 | 140 | 0.5 | 0.8 | 5.5 | 1250*600*900 |
| Oxygen/Nitrogen | WWND-150/4-10 | 150 | 0.4 | 1.0 | 11 | 1430*1030*1350 |
| Oxygen/Nitrogen | SWND-240/4-10 | 240 | 0.4 | 1.0 | 15 | 1500×1100×1620 |
| Oxygen/Nitrogen | VWY-120/5-10 | 120 | 0.5 | 1.0 | 7.5 | 1250*600*1000 |
| Oxygen/Nitrogen | SWY-150/4-16 | 150 | 0.4 | 1.6 | 15 | 1250*900*1480 |
| Oxygen/Nitrogen | WWN-100/4-25 | 100 | 0.4 | 2.5 | 15 | 1350*700*1200 |
| Oxygen/Nitrogen | WWN-120/6-30 | 120 | 0.6 | 3.0 | 15 | 1250*800*1200 |
| Oxygen/Nitrogen | WWN-120/6-45 | 120 | 0.6 | 4.5 | 18.5 | 1350*1100*1100 |
| Oxygen/Nitrogen | WWN-80/5-45 | 80 | 0.5 | 4.5 | 15 | 1350*700*1200 |
| Oxygen/Nitrogen | WWN-240/5-10 | 240 | 0.5 | 1.0 | 15 | 1350*800*1200 |
| Oxygen/Nitrogen | WWN-300/0.5-8-II | 300 | 0.05 | 0.8 | 22*2 | 2500*1200*800 |
| Oxygen/Nitrogen | WWNFB-900/4-8-II | 900 | 0.4 | 0.8 | 22*2 | 2600*1000*900 |
| Oxygen/Nitrogen | VWN-180/5-25-II | 180 | 0.5 | 2.5 | 11*2 | 1500*1350*1100 |
| Oxygen/Nitrogen | WWN-200/3-18-II | 200 | 0.3 | 1.8 | 11*2 | 1450*1350*1100 |
| Oxygen/Nitrogen | WWN-200/6-30-II | 200 | 0.6 | 3.0 | 11*2 | 1600*1600*1200 |
| Oxygen/Nitrogen | WWFB-430/4-9 | 430 | 0.4 | 0.9 | 22 | 1500*1000*800 |
Successful cases
FAQ
FAQ:
Q1. Are you trading company or manufacture ?
A: We are professional manufacture of screw air compressor of HangZhou,ZheJiang ,China. More than 18 years of experience in air compressor manufacturing.
Q2. How long is the delivery time ?
A: For standard voltage ,15 working days. Non-standard ,please contact our sales.
Q3. What’s payment term ?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we could accept USD, RMB, Euro and other currency.
Q4. How about your after-sales service ?
A: 1.Provide customers with installation and commissioning online instructions.
2. Well-trained engineers available to overseas service.
3.CHINAMFG agents and after service avaiable.arrange our engineers to help you training and installation.
Q5. How about your warranty?
A: One year for the whole machine and 2 years for screw air end, except consumable spare parts.
Q6. Do you have any certificate ?
A: Yes, per different customer’s market need ,we can offer CE ,ISO etc certificate.
Q7. What about the maintenance ?
A: First maintenance need to be done after 500Hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q8. How do you control quality ?
A: 1. The raw materials are strictly inspected
2. Some key parts are imported from overseas
3. Each compressor must pass at least 5 hours of continuous testing before leaving the factory.
Q9. Do you offer OEM service ?
A: Yes.Both OEM & ODM service can be accepted.
Q10.How long could your air compressor be used?
A: Generally, more than 10 years.
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 24 Months |
| Lubrication Style: | Oil-free |
| Customization: |
Available
|
|
|---|
What Is the Typical Lifespan of a Gas Air Compressor?
The typical lifespan of a gas air compressor can vary depending on several factors, including the quality of the compressor, its usage patterns, maintenance practices, and environmental conditions. However, with proper care and maintenance, a gas air compressor can last for many years. Here’s a detailed explanation of the factors that can affect the lifespan of a gas air compressor:
1. Quality of the Compressor:
The quality and construction of the gas air compressor play a significant role in determining its lifespan. Compressors made with high-quality materials, precision engineering, and robust components are generally more durable and can withstand heavy usage over an extended period.
2. Usage Patterns:
The usage patterns of the gas air compressor can impact its lifespan. If the compressor is used consistently and for extended periods, it may experience more wear and tear compared to compressors used intermittently or for lighter tasks. Heavy-duty applications, such as continuous operation with high-demand tools, can put more strain on the compressor and potentially reduce its lifespan.
3. Maintenance Practices:
Regular maintenance is crucial for extending the lifespan of a gas air compressor. Following the manufacturer’s recommended maintenance schedule, performing routine tasks like oil changes, filter cleaning/replacement, and inspection of components can help prevent issues and ensure optimal performance. Neglecting maintenance can lead to accelerated wear and potential breakdowns.
4. Environmental Conditions:
The operating environment can significantly impact the lifespan of a gas air compressor. Factors such as temperature extremes, humidity levels, presence of dust or debris, and exposure to corrosive substances can affect the compressor’s components and overall performance. Compressors used in harsh environments may require additional protection or specialized maintenance to mitigate these adverse conditions.
5. Proper Installation and Operation:
Proper installation and correct operation of the gas air compressor are essential for its longevity. Following the manufacturer’s guidelines for installation, ensuring proper ventilation, maintaining correct oil levels, and operating within the compressor’s specified capacity and pressure limits can help prevent excessive strain and premature wear.
Considering these factors, a well-maintained gas air compressor can typically last anywhere from 10 to 15 years or even longer. However, it’s important to note that this is a general estimate, and individual results may vary. Some compressors may experience shorter lifespans due to heavy usage, inadequate maintenance, or other factors, while others may last well beyond the expected lifespan with proper care and favorable conditions.
Ultimately, investing in a high-quality gas air compressor, adhering to recommended maintenance practices, and using it within its intended capabilities can help maximize its lifespan and ensure reliable performance for an extended period.
Can Gas Air Compressors Be Used in Agriculture?
Yes, gas air compressors can be used in various agricultural applications. Here’s a detailed explanation:
1. Pneumatic Tools and Equipment:
Gas air compressors can power a wide range of pneumatic tools and equipment used in agriculture. These tools include pneumatic drills, impact wrenches, nail guns, staplers, and pneumatic pumps. Gas air compressors provide the necessary compressed air to operate these tools, making various tasks more efficient and convenient on the farm.
2. Irrigation Systems:
Gas air compressors can be used to power irrigation systems in agriculture. They can supply compressed air to operate pneumatic valves, which control the flow of water in irrigation networks. Gas air compressors ensure reliable and efficient operation of irrigation systems, facilitating the distribution of water to crops in a controlled manner.
3. Grain Handling and Storage:
Air compressors play a vital role in grain handling and storage facilities. They are used to power aeration systems that provide airflow to grains stored in silos or bins. Aeration helps control the temperature and moisture levels, preventing spoilage and maintaining grain quality. Gas air compressors provide the airflow necessary for effective aeration in grain storage operations.
4. Cleaning and Maintenance:
In agriculture, gas air compressors are commonly used for cleaning and maintenance tasks. They can power air blowers or air guns to remove dust, debris, or chaff from machinery, equipment, or storage areas. Gas air compressors provide a high-pressure stream of compressed air, facilitating efficient cleaning and maintenance operations.
5. Livestock Operations:
Gas air compressors find applications in livestock operations as well. They can power pneumatic equipment used for animal care, such as pneumatic nail guns for building or repairing livestock enclosures, pneumatic pumps for water distribution, or pneumatic tools for general maintenance tasks.
6. Portable and Versatile:
Gas air compressors are often portable and can be easily transported around the farm, allowing flexibility in agricultural operations. Their versatility makes them suitable for various tasks, from powering tools and equipment in the field to providing compressed air for maintenance or cleaning in different farm locations.
7. Remote Locations:
In agricultural settings where access to electricity may be limited, gas air compressors offer a reliable alternative. They can be powered by gasoline or diesel engines, providing compressed air even in remote areas without electrical infrastructure.
8. Considerations:
When using gas air compressors in agriculture, it is essential to consider factors such as compressor size, capacity, and maintenance requirements. Selecting the right compressor based on the specific needs of the agricultural applications ensures optimal performance and efficiency.
In summary, gas air compressors have various applications in agriculture. They can power pneumatic tools and equipment, operate irrigation systems, facilitate grain handling and storage, assist in cleaning and maintenance tasks, support livestock operations, and offer portability and versatility. Gas air compressors contribute to increased efficiency, convenience, and productivity in agricultural operations.
Are There Different Types of Gas Air Compressors Available?
Yes, there are different types of gas air compressors available, each designed to suit specific applications and requirements. These different types vary in terms of design, power source, configuration, and intended use. Here’s a detailed explanation of the various types of gas air compressors:
1. Reciprocating Gas Air Compressors:
Reciprocating gas air compressors, also known as piston compressors, use a reciprocating motion of one or more pistons to compress the air. These compressors are commonly used for small to medium-scale applications and are available in both single-stage and two-stage configurations. Single-stage compressors compress the air in a single stroke, while two-stage compressors use an additional cylinder for further compression, resulting in higher pressures.
2. Rotary Screw Gas Air Compressors:
Rotary screw gas air compressors utilize two interlocking helical screws to compress the air. These compressors are known for their continuous and efficient operation, making them suitable for demanding industrial applications. They are often used in industries such as manufacturing, construction, and automotive where a constant supply of compressed air is required.
3. Rotary Vane Gas Air Compressors:
Rotary vane gas air compressors use a rotor with sliding vanes to compress the air. As the rotor rotates, the vanes slide in and out, creating compression chambers that compress the air. These compressors are compact, reliable, and often used for smaller-scale applications or in situations where space is limited.
4. Centrifugal Gas Air Compressors:
Centrifugal gas air compressors operate by accelerating the air using a high-speed impeller. The accelerated air is then redirected into a diffuser, which converts the velocity energy into pressure energy. These compressors are commonly used for large-scale applications requiring high volumes of compressed air, such as in power plants, refineries, or chemical processing industries.
5. Oil-Free Gas Air Compressors:
Oil-free gas air compressors are designed to provide clean, oil-free compressed air. They feature special sealing mechanisms and materials to prevent oil contamination in the compressed air. These compressors are commonly used in industries where oil-free air is essential, such as food and beverage processing, pharmaceuticals, electronics manufacturing, and painting applications.
6. Portable Gas Air Compressors:
Portable gas air compressors are specifically designed for mobility and ease of transportation. These compressors often feature wheels, handles, or trailers for convenient movement. They are commonly used in construction sites, remote job locations, outdoor events, or other situations where compressed air is needed at different locations.
7. High-Pressure Gas Air Compressors:
High-pressure gas air compressors are designed to generate compressed air at elevated pressures. These compressors are used in applications that require air pressure higher than the standard range, such as in diving operations, breathing air systems, or specialized industrial processes.
8. Biogas Air Compressors:
Biogas air compressors are specifically designed to compress biogas, which is generated from the decomposition of organic matter. These compressors are used in biogas production facilities, landfills, wastewater treatment plants, or agricultural operations where biogas is produced and utilized as an energy source.
These are just a few examples of the different types of gas air compressors available. Each type has its own advantages and is suitable for specific applications based on factors such as required airflow, pressure, mobility, oil-free operation, and environmental considerations. It’s important to choose the appropriate type of gas air compressor based on the specific needs of the application to ensure optimal performance and efficiency.
editor by CX 2023-10-07
China manufacturer Industrial Mining Booster 96kw Mobile Diesel Gasoline Air Compressor Construction Equipment Rental 100cfm 8bar Pump Manufacturer Parts with Great quality
Product Description
Jinjing is a Chinese brand of air compressors. They offer a range of diesel-powered air compressors in different sizes and capacities. They offer models with a wide range of features, such as: high-pressure outputs, low-noise operation, and efficient fuel consumption. Their compressors are designed for heavy-duty use and come with durable materials and reliable performance.
Advantage:
1. Compact structure and lightweight: The CZPT brand portable diesel air compressor is designed with a compact system and is lightweight. It is easy to move and transport, and is suitable for use in narrow spaces.
2. Low noise: The CZPT brand portable diesel air compressor is designed with low noise levels, making it more suitable for use in areas where quiet operation is desired.
3. High efficiency: The CZPT brand portable diesel air compressor is designed to be highly efficient, helping to reduce energy consumption and operating costs.
4. Durable and reliable: The CZPT brand portable diesel air compressor is designed to be durable and reliable, providing high performance and long-term reliability.
5. Easy to use: The CZPT brand portable diesel air compressor is easy to use and operate, making it suitable for both professional and amateur users.
PRODUCT HIGHLIGHTS
1. The brand power, reliable quality, and stable performance. The harsh thermal equilibrium serviceability can guarantee that the machine works effectively under a high-temperature environment (≤40ºC).
2. Unique patent design, light load startup system, the air control design is adapted to the drilling work with high stability.
3. Efficient cooling system, divided into 3 parts: water-cooled, mid-cold, oil cold, which ensure the reliable operation of diesel engine, and it’s suitable for high-temperature working environment.
4. Independent research and development of the opposite door design, rational layout, which is easy to do regular maintenance, with advantages of the fixed and portable compressor.
5. A single-point lifting, forklift hole device, equipped with a drag ring. It is suitable for repairing car transport, easy to transfer, and installation of the unit.
6. Waterproof and dustproof design, which is suitable for outdoor hard-working environments.
7. According to customer requirements, the heating boiler and remote components are available for cold starting.
| Model | Pressure (bar) |
Displacement (m³/min) |
Diesel Engine (kw) |
Air End Compression |
Type | Dimension (mm) |
Weight (kg) |
| DPS-5/8 | 8 | 5 | 41 | single stage | 2 wheel | 1660*1100*1600 | 700 |
| DPS-6/8 | 8 | 6 | 41 | single stage | 2 wheel | 2300*1460*1550 | 1000 |
| DPS-7/8 | 8 | 7 | 78 | single stage | 2 wheel | 2300*1500*1800 | 1350 |
| DPS-9/8 | 8 | 9 | 78 | single stage | 2 wheel | 2300*1500*1800 | 1450 |
| DPS-13/8 | 8 | 13 | 110 | single stage | 4 wheel | 2600*1486*2255 | 1800 |
| DPS-12/10 | 10 | 12 | 110 | single stage | 4 wheel | 3000*1776*2420 | 2500 |
| DPS-10/14.5 | 14.5 | 10 | 110 | two-stage | 4 wheel | 3000*1776*2420 | 2500 |
| DPS-12/15 | 15 | 12 | 110 | two-stage | 4 wheel | 3000*1776*2420 | 2700 |
| DPS-10/18 | 18 | 10 | 140 | two-stage | 4 wheel | 3000*1776*2420 | 2700 |
| DPS-15/15 | 15 | 15 | 132 | single stage | 4 wheel | 3000*1776*2420 | 2500 |
| DPS-15/13 | 13 | 15 | 132 | single stage | 4 wheel | 3000*1776*2420 | 2500 |
| DPS-16/16(17/13) | 16/13 | 16/17 | 154 | single stage | 4 wheel | 3000*1776*2420 | 2500 |
| DPS-16/18 | 18 | 16 | 154 | two-stage | 4 wheel | 3000*1776*2420 | 2700 |
| DPS-20/8 | 8 | 20 | 154 | two-stage | 4 wheel | 3000*1776*2420 | 2700 |
| DPS-18/17 | 17 | 18 | 191 | two-stage | 4 wheel | 3200*2000*2600 | 3500 |
| DPS-18/18(24/13) | 18/13 | 18/24 | 191 | two-stage | 4 wheel | 3200*2000*2600 | 3700 |
| DPS-20/20 | 20 | 20 | 191 | two-stage | 4 wheel | 3200*2000*2600 | 3700 |
| DPS-22/20 | 20 | 22 | 228 | two-stage | 4 wheel | 3200*2000*2600 | 4000 |
| DPS-31/25 | 25 | 31 | 295 | two-stage | track | 3200*1956*2600 | 4500 |
ZheJiang CZPT Gas Compressor Manufacturing Co., Ltd. founded in 2005, is a leading high-technology of machine and equipment manufacturer integrating the design, R&D, production, sales, and service of air compressors & Mining Equipment. Adopting advanced technology, design concept, and quality control, we are able to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With a total of 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw the air compressor
1.1 Oil-free screw air compressor
1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
2.1 Piston air compressor
2.2 Oil-free piston air compressor
2.3 Piston medium & high-pressure air compressor
3. Portable air compressor & Mining Equipment
3.1 Diesel or Electric portable screw air compressor
3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
4.1 CZPT or Adsorption compressed air drier
4.2 Compressed air filter or tank
4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with ISO procedures. which will ensure each compressor has reliable quality and a complete record to trace if needed.
Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q: How can we start ordering with your factory?
A: First, leave us an inquiry and advise which item you’re interested in, and then we will contact you in 24 hours. You’re so kind if provide all the detailed information, it will be better for us to know exactly what you need.
Q: What is your MOQ?
A: Different products have different MOQs, most are 1 set.
Q: What are your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.
Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q: Do you a trading company or a real factory?
A: We are a 100% factory; we are located in ZheJiang city, China.
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 1 Years |
| Cooling System: | Air Cooling |
| Power Source: | Diesel Engine |
| Structure Type: | Closed Type |
| Installation Type: | Movable Type |
| Samples: |
US$ 3000/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
The Air Compressor Is a Versatile Tool
The Air Compressor is one of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.
Oil-injected
Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.
Oil-free
What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
Gasoline
When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.
Electricity
Electricity in an air compressor is not cheap. A 25 HP air compressor runs for ten hours each day, five days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for three hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to four thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
Variable frequency drive
The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of six to seven bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is one of the best investments in your compressor. So, why wait any longer?
editor by CX 2023-05-17