Solution Description
Merchandise Description:
The screw air compressor is composed of a pair of parallel and intermeshing female and male screws. It is the most widely used rotary compressor.
There are 2 kinds of one-screw and twin-screw. Usually talking, the screw compressor refers to the twin-screw compressor. It was very first proposed by the German H. Krigar in 1878. It was not right up until 1934 by A. Lysholm of the Royal Institute of Technological innovation in Sweden that the technology was recognized, and it began to be applied in business and accomplished quick advancement.
Merchandise Picture:
Solution Specification:
| Design | AT-5AD-TANK | AT-7.5AD-TANK | AT-10AD-TANK | AT-15AD-TANK | AT-20AD-TANK | AT-25AD-TANK | AT-30AD-TANK |
| Air Shipping and delivery (m3/min)/ Pressur(Mpa) | .4/.8 | .76/.8 | 1./.8 | 1.7/.8 | 2.2/.eight | 3/.8 | three.6/.8 |
| .4/1. | .6/1. | .9/1. | one.5/1. | one.5/1. | two.3/1. | 3/1. | |
| Cooling Method | Air Cooling | Air Cooling | Air Cooling | Air Cooling | |||
| Lubrication Quantity(L) | 5 | 5 | 8 | 10 | 15 | 18 | eighteen |
| Driving Method | Belt-Pushed | Direct-Pushed | |||||
| Voltage | 120-440V50/60Hz | 120-440V50/60Hz | |||||
| Electricity(KW/HP) | 3.7/5 | 5.5/7.five | 7.5/10 | eleven/15 | 15/twenty | eighteen.5/twenty five | 22/30 |
| Start Program | Start off-UP | Begin-UP | Start-UP | Y-△ | Y-△ | Y-△ | Y-△ |
| Dimension(cm) | 165*63*a hundred and fifty five | 165*sixty three*one hundred fifty five | one hundred sixty five*sixty three*one hundred fifty five | 185*75*175 | 185*seventy five*a hundred seventy five | 185*eighty five*190 | 185*85*one hundred ninety |
| Tank Volume | 300L | 300L | 300L | 350L | 350L | 500L | 500L |
| Bodyweight | 250 | 260 | 270 | 280 | 430 | 550 | 580 |
| Outlet measurement | G1/2″ | G1/2″ | G1/2″ | G3/4″ | G3/4″ | G1″ | G1″ |
Product Parameters:
Product Details:
New era of high-successful Airend
one.Sophisticated and energy saving spiral tooth-type technologies.
2.New Sort 5:6 asymmetrical rotator tooth sort.
three.Electrical power increased by more than 5%-ten% in air dischage when when compared to other ordinary machine.
High -successful electrical power system
one.The motor is power saving and successful, the bearing is utilised SKF.
two. The safety class of motor up to IP55 and insulation of F degree, the performance can be enhanced for abut 5%.
3.The motor is minimal noise,lower in vibratio and easy in operation.
Coupling Transmission
1.Motor aligns the rigid coupling of the host routinely, and adopts imported elastic coupling, damping vibrates at influence,to ensure that the transmission is entirely successful,with out strength decline.
two.Direct hyperlink layout,screw host engine and motor have minimal center of gravity,reduce the noise supply and vibration source,and enhance the steadiness of the unit.
Higher Productive oil and gas speraration technique
with the planet renowned manufacturer apoda oil and gasoline sperarator, minimize the oil content of the compressor exhaust gas and the oil content of the device electricity usage is only 1-2PPM.
Smart control method
1.Multi-Language can be switched in accordance to your prerequisite.
2.With safety functions up to twelve varieties, these kinds of as overload,quick circuit,reduced temperature, over voltage and so on.
3.Simply and obvious, simple to work.
Item Application:
Workshop Screen:
Our Benefits:
Factory Overview:
World-wide Industry:
FAQ:
1.Q:Can you provide the samples to us?
A: sure, we can provide the sample to you in totally free, but the value of the freight on your account.
two. Q:Can you do the purchase according to the buyer need?
A:Of course, we can do the order according to your sample or drawings, OEM/ODM services provided.
three. Q:What is your supply time?
A:Typically, it truly is 7 times if the merchandise are in inventory. It will normally takes about fifteen-25days if the merchandise are not in inventory, Largely is dependent on the buy quantity.
four.Q:What is your conditions of payment?
A:Usually 30% benefit of products as deposit, balance volume towards the copy of the BL.
5. Q: How prolonged is the guarantee ?
A: fourteen months considering that the container delivered except rapid-dress in elements.
|
US $2,800-3,300 / Set | |
1 Set (Min. Order) |
###
| After-sales Service: | 14 Months |
|---|---|
| Warranty: | 14 Months |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
###
| Samples: |
US$ 3500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | AT-5AD-TANK | AT-7.5AD-TANK | AT-10AD-TANK | AT-15AD-TANK | AT-20AD-TANK | AT-25AD-TANK | AT-30AD-TANK |
| Air Delivery (m3/min)/ Pressur(Mpa) | 0.4/0.8 | 0.76/0.8 | 1.0/0.8 | 1.7/0.8 | 2.2/0.8 | 3/0.8 | 3.6/0.8 |
| 0.4/1.0 | 0.6/1.0 | 0.9/1.0 | 1.5/1.0 | 1.5/1.0 | 2.3/1.0 | 3/1.0 | |
| Cooling Method | Air Cooling | Air Cooling | Air Cooling | Air Cooling | |||
| Lubrication Volume(L) | 5 | 5 | 8 | 10 | 15 | 18 | 18 |
| Driving Mode | Belt-Driven | Direct-Driven | |||||
| Voltage | 120-440V;50/60Hz | 120-440V;50/60Hz | |||||
| Power(KW/HP) | 3.7/5 | 5.5/7.5 | 7.5/10 | 11/15 | 15/20 | 18.5/25 | 22/30 |
| Start System | Start-UP | Start-UP | Start-UP | Y-△ | Y-△ | Y-△ | Y-△ |
| Size(cm) | 165*63*155 | 165*63*155 | 165*63*155 | 185*75*175 | 185*75*175 | 185*85*190 | 185*85*190 |
| Tank Volume | 300L | 300L | 300L | 350L | 350L | 500L | 500L |
| Weight | 250 | 260 | 270 | 280 | 430 | 550 | 580 |
| Outlet size | G1/2" | G1/2" | G1/2" | G3/4" | G3/4" | G1" | G1" |
|
US $2,800-3,300 / Set | |
1 Set (Min. Order) |
###
| After-sales Service: | 14 Months |
|---|---|
| Warranty: | 14 Months |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
###
| Samples: |
US$ 3500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model | AT-5AD-TANK | AT-7.5AD-TANK | AT-10AD-TANK | AT-15AD-TANK | AT-20AD-TANK | AT-25AD-TANK | AT-30AD-TANK |
| Air Delivery (m3/min)/ Pressur(Mpa) | 0.4/0.8 | 0.76/0.8 | 1.0/0.8 | 1.7/0.8 | 2.2/0.8 | 3/0.8 | 3.6/0.8 |
| 0.4/1.0 | 0.6/1.0 | 0.9/1.0 | 1.5/1.0 | 1.5/1.0 | 2.3/1.0 | 3/1.0 | |
| Cooling Method | Air Cooling | Air Cooling | Air Cooling | Air Cooling | |||
| Lubrication Volume(L) | 5 | 5 | 8 | 10 | 15 | 18 | 18 |
| Driving Mode | Belt-Driven | Direct-Driven | |||||
| Voltage | 120-440V;50/60Hz | 120-440V;50/60Hz | |||||
| Power(KW/HP) | 3.7/5 | 5.5/7.5 | 7.5/10 | 11/15 | 15/20 | 18.5/25 | 22/30 |
| Start System | Start-UP | Start-UP | Start-UP | Y-△ | Y-△ | Y-△ | Y-△ |
| Size(cm) | 165*63*155 | 165*63*155 | 165*63*155 | 185*75*175 | 185*75*175 | 185*85*190 | 185*85*190 |
| Tank Volume | 300L | 300L | 300L | 350L | 350L | 500L | 500L |
| Weight | 250 | 260 | 270 | 280 | 430 | 550 | 580 |
| Outlet size | G1/2" | G1/2" | G1/2" | G3/4" | G3/4" | G1" | G1" |
Choose an Air Compressor for Your Business
There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
Positive displacement
Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
Single-stage
The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
low noise
Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
editor by czh 2023-01-09
