Product Description
| PRODUCT PARAMTERS | |||||
| TR series refrigerated air dryer | TR12 | ||||
| Max air volume | 500CFM | ||||
| Power supply | 220V / 50HZ (Other power can be customized) | ||||
| Input power | 3.50HP | ||||
| Air pipe connection | RC2″ | ||||
| Evaporator type | Aluminum alloy plate | ||||
| Refrigerant model | R410a | ||||
| System max pressure drop | 3.625 PSI | ||||
| Display interface | LED dew point display,LED alarm code display,operation status indication |
||||
| Intelligent anti-freezing protection | Constant pressure expansion valve and compressor automatic start/stop |
||||
| Temperature control | Automatic control of condensing temperature/dew point temperature | ||||
| High voltage protection | Temperature sensor | ||||
| Low voltage protection | Temperature sensor and inductive intelligent protection | ||||
| Weight(kg) | 94 | ||||
| Dimensions L × W × H(mm) | 800*610*1030 | ||||
| Installation environment: | No sun,no rain,good ventilation, device level hard ground,no dust and fluff |
||||
Condition:
Ambient temperature :38ºC,Max.42ºC
Inlet temperature :38ºC,Max.65ºC
Working pressure:0.7MPa,Max.1.6MPa
Pressure dew point:2ºC~10ºC(Air dew point :-23ºC~-17ºC)
installation environment: no sun, no rain, good ventilation, device level hard ground, no dust and fluff
Features:
1.Adopt R134a/R410a environmental protection refrigerant, green energy saving;
2.Aluminum alloy 3 in 1 plate heat exchanger design, without pollution again, high efficiency and purity;
3.Intelligent digital control system, all directional protection;
4.With high-precision automatic energy control valve, stable and reliable operation;
5.Self diagnostic function, visual display of alarm code;
6.Real time dew point display, the quality of finished gas is clear;
7.With CE standard.
| TR series refrigerated air dryer | Model | TR-01 | TR-02 | TR-03 | TR-06 | TR-08 | TR-10 | TR-12 |
| Max. air volume | m3/min | 1.2 | 2.4 | 3.6 | 6.5 | 8.5 | 11 | 13.5 |
| Power supply | 220V/50Hz | |||||||
| Input power | KW | 0.37 | 0.52 | 0.73 | 1.26 | 1.87 | 2.43 | 2.63 |
| Air pipe connection | RC3/4″ | RC1″ | RC1-1/2″ | RC2″ | ||||
| Evaporator type | Aluminum alloy plate | |||||||
| Refrigerant model | R134a | R410a | ||||||
| System Max. pressure drop | Mpa | 0.571 | ||||||
| Intelligent control and protection | ||||||||
| Display interface | LED dew point display, LED alarm code display, operation status indication | |||||||
| Intelligent anti-freezing protection | Constant pressure expansion valve & compressor automatic start /stop | |||||||
| Temperature control | Automatic control of condensing temperature / dew point temperature | |||||||
| High voltage protection | Temperature sensor | Temperature sensor &Inductive intelligent protection | ||||||
| Low voltage protection | Temperature sensor &Inductive intelligent protection | |||||||
| Weight | KG | 34 | 42 | 50 | 63 | 73 | 85 | 94 |
| Dimension | L W H |
480 380 665 |
520 410 725 |
580 460 785 |
700 540 910 |
770 590 990 |
770 590 990 |
800 610 1030 |
| FAQ | |||||||||||||
| 1. Are you a factory or a trading company? A: We are factory, and We have the right to export any country independently 2.What is the specific address of your company? 3. Do your company accept ODM & OEM? 4. What about the voltage of products? Can they be customized? 5.Do your company offer spare parts of the machines? 6.What are your payment terms? 7. What payment ways do you accept? 8. How long will you take to arrange the goods? |
|||||||||||||
| After-sales Service: | Online Support or Free Accessories Provided |
|---|---|
| Warranty: | 1 Year |
| Drying Medium: | Air |
| Cooling Way: | Air Cooling |
| Type: | Small |
| Transport Package: | Wooden Cases or Customized Packed |
| Customization: |
Available
|
|
|---|
.webp)
Are there special considerations for air compressor installations in remote areas?
Yes, there are several special considerations to take into account when installing air compressors in remote areas. These areas often lack access to infrastructure and services readily available in urban or well-developed regions. Here are some key considerations:
1. Power Source:
Remote areas may have limited or unreliable access to electricity. It is crucial to assess the availability and reliability of the power source for operating the air compressor. In some cases, alternative power sources such as diesel generators or solar panels may need to be considered to ensure a consistent and uninterrupted power supply.
2. Environmental Conditions:
Remote areas can present harsh environmental conditions that can impact the performance and durability of air compressors. Extreme temperatures, high humidity, dust, and corrosive environments may require the selection of air compressors specifically designed to withstand these conditions. Adequate protection, insulation, and ventilation must be considered to prevent damage and ensure optimal operation.
3. Accessibility and Transport:
Transporting air compressors to remote areas may pose logistical challenges. The size, weight, and portability of the equipment should be evaluated to ensure it can be transported efficiently to the installation site. Additionally, the availability of suitable transportation infrastructure, such as roads or air transportation, needs to be considered to facilitate the delivery and installation process.
4. Maintenance and Service:
In remote areas, access to maintenance and service providers may be limited. It is important to consider the availability of trained technicians and spare parts for the specific air compressor model. Adequate planning for routine maintenance, repairs, and troubleshooting should be in place to minimize downtime and ensure the longevity of the equipment.
5. Fuel and Lubricants:
For air compressors that require fuel or lubricants, ensuring a consistent and reliable supply can be challenging in remote areas. It is necessary to assess the availability and accessibility of fuel or lubricant sources and plan for their storage and replenishment. In some cases, alternative or renewable fuel options may need to be considered.
6. Noise and Environmental Impact:
Remote areas are often characterized by their natural beauty and tranquility. Minimizing noise levels and environmental impact should be a consideration when installing air compressors. Selecting models with low noise emissions and implementing appropriate noise reduction measures can help mitigate disturbances to the surrounding environment and wildlife.
7. Communication and Remote Monitoring:
Given the remote location, establishing reliable communication channels and remote monitoring capabilities can be essential for effective operation and maintenance. Remote monitoring systems can provide real-time data on the performance and status of the air compressor, enabling proactive maintenance and troubleshooting.
By addressing these special considerations, air compressor installations in remote areas can be optimized for reliable operation, efficiency, and longevity.
.webp)
How do you choose the right air compressor for woodworking?
Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:
1. Required Air Volume (CFM):
Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.
2. Tank Size:
Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.
3. Maximum Pressure (PSI):
Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.
4. Noise Level:
Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.
5. Portability:
Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.
6. Power Source:
Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.
7. Quality and Reliability:
Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.
8. Budget:
Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.
By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.
.webp)
How does an air compressor work?
An air compressor works by using mechanical energy to compress and pressurize air, which is then stored and used for various applications. Here’s a detailed explanation of how an air compressor operates:
1. Air Intake: The air compressor draws in ambient air through an intake valve or filter. The air may pass through a series of filters to remove contaminants such as dust, dirt, and moisture, ensuring the compressed air is clean and suitable for its intended use.
2. Compression: The intake air enters a compression chamber, typically consisting of one or more pistons or a rotating screw mechanism. As the piston moves or the screw rotates, the volume of the compression chamber decreases, causing the air to be compressed. This compression process increases the pressure and reduces the volume of the air.
3. Pressure Build-Up: The compressed air is discharged into a storage tank or receiver where it is held at a high pressure. The tank allows the compressed air to be stored for later use and helps to maintain a consistent supply of compressed air, even during periods of high demand.
4. Pressure Regulation: Air compressors often have a pressure regulator that controls the output pressure of the compressed air. This allows the user to adjust the pressure according to the requirements of the specific application. The pressure regulator ensures that the compressed air is delivered at the desired pressure level.
5. Release and Use: When compressed air is needed, it is released from the storage tank or receiver through an outlet valve or connection. The compressed air can then be directed to the desired application, such as pneumatic tools, air-operated machinery, or other pneumatic systems.
6. Continued Operation: The air compressor continues to operate as long as there is a demand for compressed air. When the pressure in the storage tank drops below a certain level, the compressor automatically starts again to replenish the compressed air supply.
Additionally, air compressors may include various components such as pressure gauges, safety valves, lubrication systems, and cooling mechanisms to ensure efficient and reliable operation.
In summary, an air compressor works by drawing in air, compressing it to increase its pressure, storing the compressed air, regulating the output pressure, and releasing it for use in various applications. This process allows for the generation of a continuous supply of compressed air for a wide range of industrial, commercial, and personal uses.
editor by CX 2023-10-01
China Standard Freezing Equipment Cold Room Indoor Unit DJ Evaporator Coil Condenser Refrigerator Air Cooler Evaporator and Compressor lowes air compressor
Product Description
Product Description
Product Parameters
Scope of application:
DL high temperature type (room temperature 12 to -2 degrees Celsius) fan space 4.5mm
DD medium temperature type (cool temperature -2 to -18 degrees Celsius) fan space 6.0mm
DJ low temperature type (cool temperature -18 to -31 degrees Celsius) fan space 9.0mm
The shell of cold room evaporator is generally made of plastic-sprayed iron plate, food-grade stainless steel plate or embossed aluminum plate. The cold room evaporator has many advantages such as large heat exchange, convenient and simple, high corrosion resistance, and beautiful appearance. The heat exchange coil of the air cooler generally uses internal threads. The heat exchange copper tube is in close contact with the aluminum fin through a hydraulic tube expander, thereby reducing the contact distance and improving the heat transfer coefficient.
After the cold room evaporator is produced, it goes through a strict decontamination process to ensure the cleanliness of the quality system. The cold room evaporator uses a high-efficiency outer rotor motor. The motor of this structure has the advantages of large air volume, high wind speed, and long service life. The cold room evaporator should be able to Install explosion-proof motors according to different needs.
DL SERIES
| Model | Capacity (W) |
Cooling surface (m2) |
Fin Space (mm) |
Fan | HeaterVoltage (v) |
|||
| Qty | Size (mm) |
Air flow (m3/h) |
Voltage (v) |
|||||
| DL-2.0/10 | 2000 | 10 | 4.5 | 1 | 300 | 1700 | 380 | 220 |
| DL-3.0/15 | 3000 | 15 | 4.5 | 2 | 300 | 3400 | 380 | 220 |
| DL-5.0/25 | 5000 | 25 | 4.5 | 3 | 400 | 5100 | 380 | 220 |
| DL-8.0/40 | 8000 | 40 | 4.5 | 2 | 400 | 8000 | 380 | 220 |
| DL-11.2/55 | 11200 | 55 | 4.5 | 2 | 500 | 8000 | 380 | 220 |
| DL-16.2/80 | 16200 | 80 | 4.5 | 2 | 500 | 12000 | 380 | 220 |
| DL-21.0/105 | 21000 | 105 | 4.5 | 2 | 500 | 12000 | 380 | 220 |
| DL-25.0/135 | 25000 | 135 | 4.5 | 3 | 500 | 18000 | 380 | 220 |
| DL-32.6/160 | 32600 | 160 | 4.5 | 3 | 500 | 18000 | 380 | 220 |
| DL-37.6/185 | 37600 | 185 | 4.5 | 3 | 500 | 18000 | 380 | 220 |
| DL-42.7/220 | 42700 | 220 | 4.5 | 4 | 500 | 24000 | 380 | 220 |
| DL-50.0/250 | 50000 | 250 | 4.5 | 4 | 500 | 24000 | 380 | 220 |
| DL-55.0/280 | 55000 | 280 | 4.5 | 4 | 500 | 24000 | 380 | 220 |
| DL-60.0/300 | 60000 | 300 | 4.5 | 4 | 500 | 24000 | 380 | 220 |
| DL-66.0/330 | 66000 | 330 | 4.5 | 4 | 500 | 24000 | 380 | 220 |
| DL-70.0/375 | 70000 | 375 | 4.5 | 4 | 600 | 44000 | 380 | 220 |
| DL-82.0/410 | 82000 | 410 | 4.5 | 4 | 600 | 44000 | 380 | 220 |
| DL-94.0/470 | 94000 | 470 | 4.5 | 5 | 630 | 45000 | 380 | 220 |
| DL-116.0/580 | 11600 | 580 | 4.5 | 5 | 630 | 45000 | 380 | 220 |
DD SERIES
| Model | Capacity (W) |
Cooling surface (m2) |
Fin Space (mm) |
Fan | HeaterVoltage (v) |
|||
| Qty | Size (mm) |
Air flow (m3/h) |
Voltage (v) |
|||||
| DD-1.3/7 | 1300 | 7 | 6 | 1 | 300 | 1700 | 380 | 220 |
| DD-2.2/12 | 2200 | 12 | 6 | 2 | 300 | 3400 | 380 | 220 |
| DD-2.8/15 | 2800 | 15 | 6 | 2 | 300 | 3400 | 380 | 220 |
| DD-3.7/22 | 3700 | 22 | 6 | 3 | 300 | 5100 | 380 | 220 |
| DD-5.6/30 | 5600 | 30 | 6 | 2 | 400 | 8000 | 380 | 220 |
| DD-7.5/40 | 7500 | 40 | 6 | 2 | 400 | 8000 | 380 | 220 |
| DD-11.2/60 | 11200 | 60 | 6 | 2 | 500 | 12000 | 380 | 220 |
| DD-14.9/80 | 14900 | 80 | 6 | 2 | 500 | 12000 | 380 | 220 |
| DD-18.7/100 | 18700 | 100 | 6 | 3 | 500 | 18000 | 380 | 220 |
| DD-22.4/120 | 22400 | 120 | 6 | 3 | 500 | 18000 | 380 | 220 |
| DD-26.4/140 | 26400 | 140 | 6 | 3 | 500 | 18000 | 380 | 220 |
| DD-30.0/160 | 30000 | 160 | 6 | 4 | 500 | 24000 | 380 | 220 |
| DD-35.0/180 | 35000 | 180 | 6 | 4 | 500 | 24000 | 380 | 220 |
| DD-37.0/200 | 37000 | 200 | 6 | 4 | 500 | 24000 | 380 | 220 |
| DD-40.0/220 | 40000 | 220 | 6 | 4 | 500 | 24000 | 380 | 220 |
| DD-46.0/250 | 46000 | 250 | 6 | 4 | 500 | 24000 | 380 | 220 |
| DD-50.0/275 | 50000 | 275 | 6 | 4 | 600 | 44000 | 380 | 220 |
| DD-57.0/310 | 57000 | 310 | 6 | 5 | 600 | 44000 | 380 | 220 |
| DD-67.0/360 | 67000 | 360 | 6 | 5 | 630 | 45000 | 380 | 220 |
| DD-81.0/440 | 81000 | 440 | 6 | 5 | 630 | 45000 | 380 | 220 |
DJ SERIES
| Model | Capacity (W) |
Cooling surface (m2) |
Fin Space (mm) |
Fan | HeaterVoltage (v) |
|||
| Qty | Size (mm) |
Air flow (m3/h) |
Voltage (v) |
|||||
| DJ-1.2/8 | 1200 | 8 | 9 | 2 | 300 | 3400 | 380 | 220 |
| DJ-2.1/15 | 2100 | 15 | 9 | 3 | 300 | 5100 | 380 | 220 |
| DJ-3.6/20 | 3600 | 20 | 9 | 2 | 400 | 8000 | 380 | 220 |
| DJ-4.6/30 | 4600 | 30 | 9 | 2 | 400 | 8000 | 380 | 220 |
| DJ-7.1/40 | 7100 | 40 | 9 | 2 | 500 | 12000 | 380 | 220 |
| DJ-8.9/55 | 8900 | 55 | 9 | 2 | 500 | 12000 | 380 | 220 |
| DJ-11.6/70 | 11600 | 70 | 9 | 3 | 500 | 18000 | 380 | 220 |
| DJ-14.3/85 | 14300 | 85 | 9 | 3 | 500 | 18000 | 380 | 220 |
| DJ-17.1/100 | 17100 | 100 | 9 | 3 | 500 | 18000 | 380 | 220 |
| DJ-19.6/115 | 19600 | 115 | 9 | 4 | 500 | 24000 | 380 | 220 |
| DJ-22/130 | 22000 | 130 | 9 | 4 | 500 | 24000 | 380 | 220 |
| DJ-23/140 | 23000 | 140 | 9 | 4 | 500 | 24000 | 380 | 220 |
| DJ-25/150 | 25000 | 150 | 9 | 4 | 500 | 24000 | 380 | 220 |
| DJ-28/170 | 28000 | 170 | 9 | 4 | 500 | 24000 | 380 | 220 |
| DJ-30/190 | 30000 | 190 | 9 | 4 | 600 | 44000 | 380 | 220 |
| DJ-35/210 | 35000 | 210 | 9 | 4 | 600 | 44000 | 380 | 220 |
| DJ-41/250 | 41000 | 250 | 9 | 5 | 630 | 45000 | 380 | 220 |
| DJ-50/300 | 50000 | 300 | 9 | 5 | 630 | 45000 | 380 | 220 |
Our Case
Company Profile
Production Process
Packaging & Shipping
FAQ
Q1: Are you a factory or a trading company?
A1: We have a factory
Q2: Where is your factory located?
A2: Our factory is located in HangZhou, ZheJiang province.
Q3: Is a sample available?
A3: Yes, but the sample will be at your charge.
Q4: What is the main market for your products?
A4: Our main market is in Middle East, Southeast Asia,South America, Africa,South Asia and so on.
Welcome to contact us for more details!
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Year |
| Certification: | CE, ISO |
| Color: | White |
| Shipping Port: | Guangzhou/Foshan/Shenzhen |
| Lead Time: | 15 Days |
| Samples: |
US$ 2980/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by CX 2023-04-22
China Hitachi Air Conditioner Compressor SL211CV-C7lu for Air Cooler air compressor for car
Merchandise Description
1.Solution Description
Hitachi rotary Air Conditioner Compressor SD156CV-H6AU for condensing unit
| Model | Hitachi |
| Product | SD156CV-H6AU |
| Ability | 3000 Piece/Items for each Month |
| Refrigerant | R22 |
| Color | Black |
| MOQ | one |
| Deal | Picket circumstance |
| shipment | inside of 2 weeks |
| certificates | VDE, TUV,UL, ROHS and CE |
2. Comprehensive Impression
3. More Models for Referance
4. Packing & Deliver
5.Our service
A.12 Several hours serives, quick reaction
B. Outstanding high quality
C.5QC ensure each and every get produced strictly as for each clients’ requests.
D. Dispatch in time and keep in contact with customers anytime
E.We will be affordable costs and top quality items, good after-income service
If you should come across any issues
Make sure you do not hesitate in obtaining in touch.We are much more than pleased to examine any problems you may possibly have.
Semi-hermetic compressor
Airtight Compressor
Refrigeration Compressor Unit
eight, How about samples?
Sample Guide Time: 2 or 3 working days
Sample Fee:
1).It truly is cost-free for all for a regular customer
6.FAQ
FAQ
1,What is your MOQ?
Our MOQ is usually 1 set.
2, What is the price tag?
The price is determined by Quantity and Diverse Brand name.
3,What is your delievery time?
The time of delievery is 7-15 functioning times soon after payment.
4,What is the shipping port?
We ship the products by means of HangZhou or HangZhou,China.
5,What is your payment terms?
We accept 30% T/T in advance,70% in the time period of supply.
six,What is the spot of your organization?
Our manufacturing facility is positioned in HangZhou Metropolis,ZheJiang Province,China.If you would like to have a visit, you are warmly welcome.
7,What is your main items?
Emphasis on:
two).for new consumers, we will charge first, it is totally refundable when buy verified.
7. About us
|
HangZhou Meituo Electrical Refrigeration Equipment Co., Ltd. is mainly engaged in the production and sale compressor that utilised for fridge, air conditioning, cold area ect. We supply distinct sorts of compressors with diverse brands, the ideal quality,competitive value ,cheapest MOQ ,quick shipping and delivery. We usually strive to give the very best service to our buyers and aim to fultill the requests of our clients, all staff in our manufacturing facility stick to our plan of placing customers at the very first area.
For compressor,We source subsequent makes. one.Rotary compressor: Toshiba,Panasonic 2.Scroll: Copeland, Dan foss performer, hitachi, Daikin, Sanyo |
8.Certificate
9. Contact US
Ms. Rina
MEITUO CO.,Restricted
http://meituo
|
US $299-499 / Set | |
1 Set (Min. Order) |
###
| Capacitance: | 9100 |
|---|---|
| Power: | 1/50/220-240 |
| Displacement BTU: | 0.952 |
| Capacity(W): | 17800 |
| Eep: | 10.27 |
| Rla: | 7.60 |
###
| Customization: |
Available
|
|---|
###
| Brand | Hitachi |
| Model | SD156CV-H6AU |
| Ability | 3000 Piece/Pieces per Month |
| Refrigerant | R22 |
| Color | Black |
| MOQ | 1 |
| Package | Wooden case |
| shipment | within 2 weeks |
| certificates | VDE, TUV,UL, ROHS and CE |
###
|
Dongguan Meituo Electrical Refrigeration Equipment Co., Ltd. is mainly engaged in the production and sale compressor that used for refrigerator, air conditioning, cold room ect. We supply different kinds of compressors with different brands, the best quality,competitive price ,lowest MOQ ,fast delivery. We always strive to provide the best service to our customers and aim to fultill the requests of our customers, all employees in our factory follow our policy of putting customers at the first place.
For compressor,We supply following brands. 1.Rotary compressor: Toshiba,Panasonic 2.Scroll: Copeland, Dan foss performer, hitachi, Daikin, Sanyo |
|
US $299-499 / Set | |
1 Set (Min. Order) |
###
| Capacitance: | 9100 |
|---|---|
| Power: | 1/50/220-240 |
| Displacement BTU: | 0.952 |
| Capacity(W): | 17800 |
| Eep: | 10.27 |
| Rla: | 7.60 |
###
| Customization: |
Available
|
|---|
###
| Brand | Hitachi |
| Model | SD156CV-H6AU |
| Ability | 3000 Piece/Pieces per Month |
| Refrigerant | R22 |
| Color | Black |
| MOQ | 1 |
| Package | Wooden case |
| shipment | within 2 weeks |
| certificates | VDE, TUV,UL, ROHS and CE |
###
|
Dongguan Meituo Electrical Refrigeration Equipment Co., Ltd. is mainly engaged in the production and sale compressor that used for refrigerator, air conditioning, cold room ect. We supply different kinds of compressors with different brands, the best quality,competitive price ,lowest MOQ ,fast delivery. We always strive to provide the best service to our customers and aim to fultill the requests of our customers, all employees in our factory follow our policy of putting customers at the first place.
For compressor,We supply following brands. 1.Rotary compressor: Toshiba,Panasonic 2.Scroll: Copeland, Dan foss performer, hitachi, Daikin, Sanyo |
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by czh 2022-12-31