Product Description
Oil Free CH4/O2/N2/CNG/CO2/CFCs/He/SF6/Ar/H2 Compressor Booster:
Product Description
Our factory produced many kinds of oil free compressor, inlcuding oil free oxygen compressor, oil free gas compressor, including air, nitrogen gas, hydrogen gas, natural gas, Argon gas, helium gas, Sf6 gas ects more than 30 kinds of gas medium,max pressure up to 40Mpa.
A biogas methane recovery compressor is a vital component in the process of capturing and utilizing biogas generated from organic waste.This specialized compressor plays a crucial role in increasing the pressure of the biogas, making it suitable for storage, transportation, and utilization. By effectively compressing biogas, it enables efficient and cost-effective recovery of this renewable energy source. Biogas recovery compressors offer advantages such as high efficiency, durability, and low maintenance requirements. They find applications in a wide range of industries, including agriculture, wastewater treatment plants, landfills, and anaerobic digestion facilities. These compressors contribute to sustainable energy solutions by harnessing the potential of biogas and reducing reliance on fossil fuels, thus promoting environmental preservation and energy independence.
Argon compressors are commonly used in applications such as:
1. Agriculture: Biogas compressors are used in agricultural operations that employ anaerobic digesters to convert organic waste into biogas. The compressed biogas can be used for heating, electricity generation, and powering farm equipment, providing renewable energy solutions for farming operations.
2. Waste Management: Biogas compressors play a vital role in waste management facilities, such as landfills and wastewater treatment plants. They enable the compression of biogas generated from decomposing organic waste, which can then be used as a renewable energy source or flared off to reduce greenhouse gas emissions.
3. Industrial Applications: Biogas compressors are utilized in industries that produce biogas as a byproduct of their operations. This includes food processing, breweries, distilleries, and pulp and paper mills. The compressed biogas can be utilized for heating, steam generation, or electricity production, offering cost-effective and environmentally friendly energy solutions.
4. Transportation: Biogas compressors play a crucial role in compressing biogas for use as a transportation fuel. Compressed biogas, also known as biomethane, can be used as a clean and renewable alternative to fossil fuels in vehicles, reducing carbon emissions and air pollution.
5. Distributed Energy Systems: Biogas compressors enable the efficient compression of biogas for integration into distributed energy systems. These systems utilize biogas as a local energy source, supplying electricity and heat to nearby communities or industrial facilities.
Product Parameters
|
Output
Nm³/h |
Rated
Inlet Pressure Mpa |
Rated Outlet Pressure Mpa |
Rated Power KW |
Volume Flow Of The Matched CO2 Generator Nm³/h |
Cooling Type |
| 3~5 | 0.3~0.7 | 1~20 | 4.0 | 3-5 | Wind |
| 8~12 | 0.3~0.7 | 1~20 | 5.5~7.5 | 8-12 | Wind |
| 15~16 | 0.3~0.7 | 1~20 | 11 | 15-16 | Wind |
| 20 | 0.3~0.7 | 1~20 | 15 | 20 | Wind |
| 24~25 | 0.3~0.7 | 1~20 | 15 | 24-25 | Wind |
| 30 | 0.3~0.7 | 1~20 | 15 | 30 | Water |
| 40 | 0.3~0.7 | 1~20 | 15 | 40 | Water |
| 50 | 0.3~0.7 | 1~20 | 18.5 | 50 | Water |
| 60~70 | 0.3~0.7 | 1~20 | 22 | 60-70 | Water |
| 80~90 | 0.3~0.7 | 1~20 | 15×2 | 80-90 | Water |
| 110~130 | 0.3~0.7 | 1~20 | 22×2 | 110-130 | Water |
| 150 | 0.3~0.7 | 1~20 | 22×2 | 150 | Water |
| The inlet pressure of the oil-free oxygen booster can be between 0-1.0MPa, and the outlet pressure can reach up to 20Mpa. It is suitable for various output and can be customized according to the specific requirements of customers. | |||||
Selection Xihu (West Lake) Dis.
Selection principle of oil-free booster (Oxygen and nitrogen as examples)
1. Working conditions: Compressed medium; Inlet pressure; Exhaust pressure; Exhaust volume (Sometimes referring to the production volume of oxygen generator and nitrogen generator)
2. Determine the compressor model according to the working conditions
3. Common sense description
Nm³/h is m³ of exhaust gas per hour under standard conditions; Nm³/min is m³ of exhaust gas per minute under standard conditions
1bar=0.1Mpa≈1kgf
The relationship between the flow rate in the pressure state and the flow rate in the standard state: the flow rate in the standard state = the flow rate in the pressure state × (fluid pressure + atmospheric pressure), the atmospheric pressure is usually 1 bar.
Product Advantages
1. Efficient Compression: Biogas compressors are designed to efficiently compress biogas to higher pressures, enabling effective storage, transportation, and utilization. They ensure maximum extraction of energy from the biogas, optimizing its use in various applications.
2. Durability and Reliability: Biogas compressors are built to withstand the demanding conditions of biogas processing environments. They are constructed with robust materials and components, ensuring durability and reliable operation even in challenging operational conditions.
3. Low Maintenance Requirements: Biogas compressors are engineered for minimal maintenance needs. They are designed to operate continuously with minimal downtime, reducing the need for frequent maintenance and repair, and ensuring high availability for uninterrupted biogas compression.
4. Safety Features: Biogas compressors incorporate safety features to protect both the equipment and operators. They include mechanisms such as pressure relief valves, temperature sensors, and automatic shutdown systems to prevent overpressure or overheating, ensuring safe and reliable operation.
5. Energy Efficiency: Biogas compressors are designed to optimize energy consumption during compression. They employ advanced technologies, such as variable speed drives and energy recovery systems, to minimize energy requirements and enhance overall energy efficiency.
6. Environmental Benefits: By facilitating the recovery and utilization of biogas, compressors contribute to the reduction of greenhouse gas emissions. Biogas, a renewable energy source, can replace fossil fuels in various applications, leading to a decrease in carbon emissions and a positive environmental impact.
Customizable Technical Parameters: For more detailed technical specifications and additional requirements specific to your needs, please contact us. We offer a range of biogas methane recovery compressors with varying capabilities and features to cater to diverse application demands.
Product Show
Project Case
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Online Support, Video Technical Support |
|---|---|
| Warranty: | 12 Months |
| Lubrication Style: | Oil-free |
| Samples: |
US$ 6500/Unit
1 Unit(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
.webp)
Can Gas Air Compressors Be Used in Construction Projects?
Gas air compressors are widely used in construction projects due to their portability, versatility, and ability to provide the necessary compressed air for various applications. They are an essential tool in the construction industry, enabling the efficient and effective operation of pneumatic tools and equipment. Here’s a detailed explanation of how gas air compressors are used in construction projects:
1. Powering Pneumatic Tools:
Gas air compressors are commonly used to power a wide range of pneumatic tools on construction sites. These tools include jackhammers, nail guns, impact wrenches, concrete breakers, air drills, sanders, grinders, and paint sprayers. The compressed air generated by the gas air compressor provides the necessary force and power for efficient operation of these tools, enabling tasks such as concrete demolition, fastening, surface preparation, and finishing.
2. Air Blow and Cleaning Operations:
In construction projects, there is often a need to clean debris, dust, and dirt from work areas, equipment, and surfaces. Gas air compressors are used to generate high-pressure air for air blow and cleaning operations. This helps maintain cleanliness, remove loose materials, and prepare surfaces for further work, such as painting or coating.
3. Operating Pneumatic Systems:
Gas air compressors are employed to operate various pneumatic systems in construction projects. These systems include pneumatic control devices, pneumatic cylinders, and pneumatic actuators. Compressed air from the gas air compressor is used to control the movement of equipment, such as gates, doors, and barriers, as well as to operate pneumatic lifts, hoists, and other lifting mechanisms.
4. Concrete Spraying and Shotcreting:
Gas air compressors are utilized in concrete spraying and shotcreting applications. Compressed air is used to propel the concrete mixture through a nozzle at high velocity, ensuring proper adhesion and distribution on surfaces. This technique is commonly employed in applications such as tunnel construction, slope stabilization, and repair of concrete structures.
5. Sandblasting and Surface Preparation:
In construction projects that require surface preparation, such as removing old paint, rust, or coatings, gas air compressors are often used in conjunction with sandblasting equipment. Compressed air powers the sandblasting process, propelling abrasive materials such as sand or grit onto the surface to achieve effective cleaning and preparation before applying new coatings or finishes.
6. Tire Inflation and Equipment Maintenance:
Gas air compressors are utilized for tire inflation and equipment maintenance on construction sites. They provide compressed air for inflating and maintaining proper tire pressure in construction vehicles and equipment. Additionally, gas air compressors are used for general equipment maintenance, such as cleaning, lubrication, and powering pneumatic tools for repair and maintenance tasks.
7. Portable and Remote Operations:
Gas air compressors are particularly beneficial in construction projects where electricity may not be readily available or feasible. Portable gas air compressors provide the flexibility to operate in remote locations, allowing construction crews to utilize pneumatic tools and equipment without relying on a fixed power source.
Gas air compressors are an integral part of construction projects, facilitating a wide range of tasks and enhancing productivity. Their ability to power pneumatic tools, operate pneumatic systems, and provide compressed air for various applications makes them essential equipment in the construction industry.
.webp)
How Do Gas Air Compressors Contribute to Energy Savings?
Gas air compressors can contribute to energy savings in several ways. Here’s a detailed explanation:
1. Efficient Power Source:
Gas air compressors are often powered by gasoline or diesel engines. Compared to electric compressors, gas-powered compressors can provide higher power output for a given size, resulting in more efficient compression of air. This efficiency can lead to energy savings, especially in applications where a significant amount of compressed air is required.
2. Reduced Electricity Consumption:
Gas air compressors, as standalone units that don’t rely on electrical power, can help reduce electricity consumption. In situations where the availability of electricity is limited or expensive, using gas air compressors can be a cost-effective alternative. By utilizing fuel-based power sources, gas air compressors can operate independently from the electrical grid and reduce dependence on electricity.
3. Demand-Sensitive Operation:
Gas air compressors can be designed to operate on demand, meaning they start and stop automatically based on the air requirements. This feature helps prevent unnecessary energy consumption during periods of low or no compressed air demand. By avoiding continuous operation, gas air compressors can optimize energy usage and contribute to energy savings.
4. Energy Recovery:
Some gas air compressors are equipped with energy recovery systems. These systems capture and utilize the heat generated during the compression process, which would otherwise be wasted. The recovered heat can be redirected and used for various purposes, such as space heating, water heating, or preheating compressed air. This energy recovery capability improves overall energy efficiency and reduces energy waste.
5. Proper Sizing and System Design:
Selecting the appropriate size and capacity of a gas air compressor is crucial for energy savings. Over-sizing a compressor can lead to excessive energy consumption, while under-sizing can result in inefficient operation and increased energy usage. Properly sizing the compressor based on the specific air demands ensures optimal efficiency and energy savings.
6. Regular Maintenance:
Maintaining gas air compressors in good working condition is essential for energy efficiency. Regular maintenance, including cleaning or replacing air filters, checking and repairing leaks, and ensuring proper lubrication, helps optimize compressor performance. Well-maintained compressors operate more efficiently, consume less energy, and contribute to energy savings.
7. System Optimization:
For larger compressed air systems that involve multiple compressors, implementing system optimization strategies can further enhance energy savings. This may include employing advanced control systems, such as variable speed drives or sequencers, to match compressed air supply with demand, minimizing unnecessary energy usage.
In summary, gas air compressors contribute to energy savings through their efficient power sources, reduced electricity consumption, demand-sensitive operation, energy recovery systems, proper sizing and system design, regular maintenance, and system optimization measures. By utilizing gas-powered compressors and implementing energy-efficient practices, businesses and industries can achieve significant energy savings in their compressed air systems.
.webp)
How Do You Choose the Right Size Gas Air Compressor for Your Needs?
Choosing the right size gas air compressor is crucial to ensure optimal performance and efficiency for your specific needs. Selecting a compressor that is too small may result in insufficient airflow or pressure, while choosing one that is too large can lead to unnecessary energy consumption and higher costs. Here’s a detailed explanation of the factors to consider when choosing the right size gas air compressor:
1. Required Airflow:
Determine the airflow requirements of your applications. Consider the tools, equipment, or processes that will be powered by the compressor and their respective airflow demands. The required airflow is typically measured in cubic feet per minute (CFM). Determine the total CFM required, taking into account any simultaneous or intermittent tool usage.
2. Operating Pressure:
Identify the operating pressure required for your applications. Different tools and systems have specific pressure requirements, measured in pounds per square inch (PSI). Ensure that the compressor you choose can deliver the required pressure consistently.
3. Duty Cycle:
Consider the duty cycle, which refers to the amount of time the compressor will be in operation within a given period. Some applications may require continuous operation, while others involve intermittent or occasional use. Take into account the duty cycle to ensure that the compressor can handle the expected workload without overheating or experiencing excessive wear.
4. Tank Size:
The tank size of a gas air compressor determines its ability to store compressed air and provide a steady supply. A larger tank can help accommodate fluctuations in demand and reduce the frequency of the compressor cycling on and off. Consider the required storage capacity based on the specific applications and the desired balance between continuous operation and storage capacity.
5. Power Source:
Gas air compressors can be powered by different fuels, such as gasoline, diesel, natural gas, or propane. Consider the availability and cost of the fuel options in your location, as well as the specific requirements of your applications. Choose a compressor that is compatible with a power source that suits your needs.
6. Portability:
Determine if portability is a requirement for your applications. If you need to move the compressor to different job sites or locations, consider a portable model with features like wheels, handles, or a compact design that facilitates easy transportation.
7. Noise Level:
If noise is a concern in your working environment, consider the noise level of the compressor. Gas air compressors can vary in their noise output, and certain models may have noise-reducing features or insulation to minimize sound emissions.
8. Manufacturer Recommendations:
Consult the manufacturer’s recommendations and guidelines for selecting the appropriate compressor size for your specific needs. Manufacturers often provide guidelines based on the anticipated applications, airflow requirements, and other factors to help you make an informed decision.
By considering these factors and carefully assessing your specific requirements, you can choose the right size gas air compressor that meets your airflow, pressure, duty cycle, and other operational needs. It’s advisable to consult with industry professionals or compressor experts for guidance, especially for complex or specialized applications.
editor by CX 2024-04-04